interface diagnosis OMEGAS LANDI

Hi all, I have in mind to do a bit of diagnosis and set the best parameters of my system lpg Landi on giulietta 1.4 tb I would like to build the interface seen that costs a bit of plastic and 3 capacitors put together, I found a diagram but it is missing the final part of the connections to the jacks, so I wanted to know if anyone has done something like this

find for two cents on the network with sw:)

Quote:

---

Originally Written by Luigi

Hi all, I have in mind to do a bit of diagnosis and set the best parameters of my system lpg Landi on giulietta 1.4 tb I would like to build the interface seen that costs a bit of plastic and 3 capacitors put together, I found a diagram but it is missing the final part of the connections to the jacks, so I wanted to know if anyone has done something like this

---

if the standard installation, you can enter and see the errors and parameters, but you can't change anything.

only the minimum and the manual pressure reducer

you can act from the map ecu gasoline

Quote:

---

Originally Written by faberecu

you can act from the map ecu gasoline

---

but from the map ecu gasoline adjust the quantity of the gas.

the ecu of the gas follows the map with gasoline , even though it still says the lambda control , the advances can be varied to optimize the operation gas

If I'm not mistaken the ecu pi? recent Landi Renzo who manage gas systems only work with the hardware key, if you don't have it also with software cable and interface can't connect