Printable View
hi guys I wanted to know how to disable the dtcs relating to the egr since I removed physically, or at least how to calculate the address from the lead to 0 thanks in advance
p.s. the car in question is an opel corsa C 1.3 CDTI the file ori is posted already in the database and below I report the link
http://www.professionalchiptuning.ne...7&d=1494486184
Error code diagnosis?
code P0403Quote:
Originally Written by Errecinque
it usually works as wellQuote:
Originally Written by alex210392
hello Errecinque thank you so much for the support, I tried, in diagnosis does not appear the error, but is the MIL on, without giving me any error in diagnosisQuote:
Originally Written by Errecinque
Then with winols display, 16-bit hex Search for the value 0403. You'll see that just before the first Bit cleared to me there is another one that refers to the lamp light. Now, unfortunately, I do not have the pc, try you should still be ableQuote:
Originally Written by alex210392
hello R5, unfortunately, I followed your advice and I cleared all the 0403 hex, but nothing to do, thanks again for the support and best wishes for a merry christmasQuote:
Originally Written by Errecinque
Strange...can you post your change???Quote:
Originally Written by alex210392
sure here it is p.s. I have copied your advice on the file that I have in the ecu now
You should try file ori only with the bits 0403 reset (at the bottom of report it ori nothing to do with the area of dtc), because, according to me, the light will turn on for other reasons related to the mod, you have touched some strange thingsQuote:
Originally Written by alex210392