Printable View
hi guys..I came into the workshop a mk2 1.3 70 hp, the car more than 4000 rpm does not climb and strattona,I checked in diagnosis, the 3 values of power supply and are ok..I also changed the pedals is not changed nothing,I also checked the 2 switches, the brake and clutch and they are ok..any advice?to those who already happened..thanks in advance
if the change of the pedal, not the outcome, you have to check the wiring, possibly redo the wires between the pedal and the ecu.
tried to check the wiring and everything is ok..the problem fixed it was the ecu
Hello have you checked the throttle body if it works well?
hello thunder....an ori to see if the map and touched it to compare if you do not that you know the parametersQuote:
Originally Written by Thunder
A control in the strata to monitor the parameters.
Consider that the higher you climb speeds of the components heated up.
You may be stumbled upon in any passive component or active, that sends you out-of-scale values, causing the error that, according to me and a dtc bogus in this case.
If so the ecu the engine is always that does not know how to repair it.
These 1.3 75 hp bring out defects absurd.
I have had this car in diagnosis abandoned by 3 mechanical....
The problem that the ftc jumped out sporadically and made me mad.