Aggirnare cable vagcom

Printable View

12-10-2012, 12:39
filippin87

Aggirnare cable vagcom

Hi I wanted to know if ? you can update a cable vagcom 704 to version 10.6,11.2,11.3.
Thanks
12-10-2012, 12:41
giarras

you ? can... soon we'll be posting.
12-10-2012, 13:22
filippin87

I have already? you have found the material on the network I wanted to know if there are also changes in the hardware or just firmware of the interface.
12-10-2012, 13:42
giarras

well...I will recommend you the version 10.6 the others are beta.
24-12-2012, 00:14
fa2st

also interested me to change the cable...there are no news about it? thanks!
27-01-2013, 22:19
demolitionMan

a small manual to know how to do?
08-02-2013, 20:56
usardaun

but buying the vcds from the on-line shop, with which version we are given?
19-02-2013, 00:42
sisco

hello all I wanted to do a question related to the software that use the vag com, and the cio? when you buy it ? provided software, or only get the cable and after must make do? I asked msport and not told me anything as you think to remove it from sale, cos? if I can find it to buy, I know a little bit more?,thanks regards
21-02-2013, 18:38
cawadany

Is normally supplied cable and its associated software, even why? each cable there goes his version of the software. Also not ? never update online, otherwise the cable is not ? pi? usable.
22-02-2013, 08:58
usardaun

What? the latest version that is on the market?
22-02-2013, 09:11
cawadany

Quote:

Originally Written by usardaun

What? the latest version that is on the market?

How do I know ? the 11.11.3
22-02-2013, 10:32
usardaun

and because you can't find the cable and software?
22-02-2013, 10:44
cawadany

Quote:

Originally Written by usardaun

and because you can't find the cable and software?

On the shop, you'll find him at 55 euro shipped.
22-02-2013, 11:05
usardaun

I do? a lap!!! any advice???
24-05-2013, 23:44
davide2000

in case one of the updates ? can return to the previous version
25-05-2013, 18:48
rebirthafterrevenge

I would like to put the Italian version of vcds on my cable ? can?
25-05-2013, 19:05
garret

Attachments: 2

guys can you tell me if this cable ? vag-com? I got on ebay but I never used it, what software does it support?
25-05-2013, 19:09
cinqueturbo

Quote:

Originally Written by garret

guys can you tell me if this cable ? vag-com? I got on ebay but I never used it, what software does it support?

Gattet not on a plate?
to see it, so it seems to me identical to mine that I was given..
vag k-com commander 1.4..
or open a discussion about it..
pi? I don't know not tried to time..
25-05-2013, 19:11
garret

no, he did not write about nothing, one side has a blue led that turns on when I connect it to the obd2 if you read the discussion elm 327 I put some of the programs that I can not make it work
25-05-2013, 19:14
cinqueturbo

Quote:

Originally Written by garret

no, he did not write about nothing, one side has a blue led that turns on when I connect it to the obd2 if you read the discussion elm 327 I put some of the programs that I can not make it work

blue led (identical to mine!
do not use elm only know by hearsay...
25-05-2013, 19:16
garret

ok thanks,that programs use for vag com? ? can update it maybe?
25-05-2013, 19:17
cinqueturbo

Quote:

Originally Written by garret

no, he did not write about nothing, one side has a blue led that turns on when I connect it to the obd2 if you read the discussion elm 327 I put some of the programs that I can not make it work

I gave the info legendaryslave in this post: http://www.professionalchiptuning.ne...oftware-Si-Usa
25-05-2013, 19:20
garret

have you installed the program? does it work?
25-05-2013, 19:23
cinqueturbo

Quote:

Originally Written by garret

have you installed the program? does it work?

Yes it works, but you or spit blood, the blood of the driver... did not recognize the interface...
25-05-2013, 19:24
garret

cabbage, and how did you do it? I have the same problem with the elm
25-05-2013, 19:28
cinqueturbo

Quote:

Originally Written by garret

cabbage, and how did you do it? I have the same problem with the elm

Watch or messed up a bit..
that sis-op xp or win7?
try to configure the device manager..
25-05-2013, 20:27
garret

I have both xp and win 7, the interface on win7 me recognizes it and installs the drivers automatically but the programs that I do not recognize, you that the program uses to scan the obd?
26-05-2013, 06:03
cinqueturbo

Quote:

Originally Written by garret

I have both xp and win 7, the interface on win7 me recognizes it and installs the drivers automatically but the programs that I do not recognize, you that the program uses to scan the obd?

For the diag. use Brain Bee - Texa IDC4 - and I think soon prover? also Autocom forum..
26-05-2013, 06:41
cinqueturbo

Quote:

Originally Written by garret

cabbage, and how did you do it? I have the same problem with the elm

I must ask my neighbor for his alfa 147 usa elm to log etc.
as the beak I ask him a little bit of info,
maybe she also knows something about the vag commander,
then we update...
26-05-2013, 11:11
garret

ok cinqueturbo, thank you for the help
27-05-2013, 18:49
cinqueturbo

Quote:

Originally Written by garret

ok cinqueturbo, thank you for the help

Then garret or info that you might solve problems..
He says that, and to operate elm or vag with multiecuscan and other important and set the com port!
elm, for example, put it on com1 and vag on com3, and set the speed to 38400bts.. (always you have available)
then with the various programs to find and make the test ports and assign the latter...
you like to set?
I for the case playing or put the vag on com3, and it works...
27-05-2013, 20:17
garret

ok those steps I had them already? facts, but to update the vag com, how do I proceed? I connect it to the obd2 and the pc, and then selecting the corresponding port I click on update driver, and them I'm going to get in the folder that you have posted on page 1 of this post?
27-05-2013, 20:41
cinqueturbo

Quote:

Originally Written by garret

ok those steps I had them already? facts, but to update the vag com, how do I proceed? I connect it to the obd2 and the pc, and then selecting the corresponding port I click on update driver, and them I'm going to get in the folder that you have posted on page 1 of this post?

But I do not see anything posted on the first page....
27-05-2013, 20:53
cinqueturbo

Attachments: 1

Quote:

Originally Written by garret

ok those steps I had them already? facts, but to update the vag com, how do I proceed? I connect it to the obd2 and the pc, and then selecting the corresponding port I click on update driver, and them I'm going to get in the folder that you have posted on page 1 of this post?

The drivers are these:
27-05-2013, 21:42
garret

thanks cinqueturbo I just successfully updated, now I would like to test vag-k commander to install it, how do I proceed?
27-05-2013, 22:45
cinqueturbo

Quote:

Originally Written by garret

thanks cinqueturbo I just successfully updated, now I would like to test vag-k commander to install it, how do I proceed?

Download and run as admin. VWTester :http://www.professionalchiptuning.ne...0&d=1369092361
27-05-2013, 22:53
garret

I have to plug it into the obd2 right? or can I do it without connecting?
27-05-2013, 23:10
cinqueturbo

or problems with the internet connection.. maybe tomorrow...hopefully....
29-05-2013, 11:04
cinqueturbo

Quote:

Originally Written by garret

I have to plug it into the obd2 right? or can I do it without connecting?

Garret then as you put it? to solved it?

All times are GMT +2. The time is now 15:19.