Problem in writing to the ecu Edc16c39 Alfa 159 jtdm.

I have a problem with the mpps.
I can't write a file in the ecu, different from the one that currently ? uploaded.
The programmer reads the file correctly in the memory.
In the process of writing gets to 100%, then does not close the ecu is giving me error message.
I tried with different files, as well as the original, but the result ? always the same; also using the
so "recovery", the writing is not v? to a good end.

The programmer ? a v. 12 transparent model all cable. (clone)
I also tried to use the software v. 13, without obtaining results.

With the galletto1260 (clone), I don't trust more?. The last time you ? locked, giving me error writing at the beginning of the process.

All of this ? due to a problem in the ecu?


And, by the pi? a month to look the price of an mpps that functions; a request was made to the online store of the site.

the excuse why? do you complicate your life read it in bdm and go safe

try posting the file ? on, and the golds that we see.

Here I am, are baked from a hard day's work....
I am attaching the file ori of my ecu Edc16c39 160-252 Alfa 159 jtdm 110kw
Annex 9411

Here is the current file of the controller.
Annex 9413

From the outset of the actual file of the ecu ? been made from another ecu, not my machine, but always 160-252


I don't know how the f? in bdm, having no experience and the proper equipment, I prefer to avoid trouble.

Not s? if you are unable to insert the attachments, and then try again.
159Simo ? the original file of the ecu.
1037398252 ? the file that is currently loaded on the ecu.

With the tools that you have mentioned and you have you can just having trouble..

Surely......
And on this play my total inexperience in the matter.
The desire to learn how to make some small change c'?.
If c'? a programmer honest and reliable; good price of course the purchase.
But I don't want to spend a fortune to "play" only on my machine.

I believe that is the fault of your mpps why? usually on the edc16 fiat group it works fine. Have you tried just your car?

Hello.
Yes, I just tried on my own.

The important ? that is not a problem of the ecu of the car.
Then for the mpps not having paid a lot of, let's say I weigh a little.
Do you have any contact that sells programmers, reliable?

strange that you can not write his own gold, you can have trouble writing what you have on if you change it, but not the ori, test to see if they have opened your ecu, if you opening it again and see if they have added something.

Hello....
Expecting your response....
No.
My ecu is not ? never been opened.
The first mapping I wrote 3 years f? with the galletto 1260.

Then the cock started to give problems in reading.

To load in the past year, today, I tribulato not a little.
Here is the reason for the purchase of a mpps. That I considered reliable.
But I was wrong.

The second t? it could be a hardware problem in the machine?
Or simply the mpps that I purchased ? na only?

I don't understand the correlation between the rewrite the same file, (which previously I always read all of the times); and not write the other files.

I had the opportunity? try another programmer, I'd say it is too fixed.

Or the file read with galletto do not agree with the other devices?

Without taking anything away from the advice of others who want to intervene in the discussion.

I used the mpps for a long time on these edc16c39 and I never had any problems, so let's say that your can have problems, the fact that the file ori must write well while others not modified writes them comes from the fact that some of the tools used to close the area cks different way (put it to 0) and the mpps has problems to check and write the cks, my advice ? take a different tool ( I recommend you k*ss), and try, or if someone from your party that has tools valid feel with him.

ps. I did not understand why you were expecting an answer, in any case, if I can answer and help but I see that lately the ec always less people that works here........

The beginning ot: ultimanente cause physical problems I have not been able to read much of the discussions that interested me; but, without taking anything from other users, valid for the forum, your posts I find them accurate and educational.
Here is the why? of my waiting, about your response.
The end of the ot.

Thanks for having explained the problem.
I am still awaiting a response from Edil about a reliable programmer.
But I have seen that ? a little bit of time that you are not connecting.

I think I understand the device that I have suggested.
I won't have any kind of problem with the files being read by other programmers, Galletto or mpps?
Maybe ? a stupid question, but I prefer to break the balls before; that have shards of the broken after.

Quote:

---

Originally Written by Simone

The beginning ot: ultimanente cause physical problems I have not been able to read much of the discussions that interested me; but, without taking anything from other users, valid for the forum, your posts I find them accurate and educational.
Here is the why? of my waiting, about your response.
The end of the ot.

Thanks for having explained the problem.
I am still awaiting a response from Edil about a reliable programmer.
But I have seen that ? a little bit of time that you are not connecting.

I think I understand the device that I have suggested.
I won't have any kind of problem with the files being read by other programmers, Galletto or mpps?
Maybe ? a stupid question, but I prefer to break the balls before; that have shards of the broken after.

---

Just to be clear..
MPPS and a great Tool, but not a clone of clones of clones, like the one your all-in transparent cable..
Then to the question of the problem with the files being read by other programmers,
If you read with a tool you write with the same tool...
Point and that's all..
there's no way you get a file from the database read with Kess and I write with the other, or vice versa..

Thanks also to You for the explanation.
Ok, recycle bin, my mpps and I try to buy a kess.
What is the difference? from master to slave?
I have read some discussions about problems with its software.
A secure version not 2000 euro exists?

With regards to read files with other devices, the original map of my car I read with galletto.
A tomorrow that will take? reassemble everything to sell it, the avr? difficulty? to write it with kess?

I gave a look around to get an idea of prices
The range varies from 150 to 2700 euro. Then I continued using it for personal and not-for-lucrative-to me it seems excessive to go beyond certain figures.

take a cock v53-54 that do everything and more?..

Okk..
St? playing on the machine.
After d? take a look at that.

? a good rule to read and write with the same tool (as I have said) but there are many files that are the same whether you read them with a tool that with another, you must not do throughout a a bunch grass, you say that these are things that come with experience, for the rest of the cock v53 or a kess should be fine.

? a checksum problem,try not to do it calculate from the ecm titaanium but only to the programmer,maybe first off she do to winols

Hello Sportknight!
I tried to rewrite all the maps that I had in memory on the pc. No result.
I don't have Winols.

In another forum I read that you've had problems on a 159. While in the other, everything was ok.

Ugo... I read now... as with the mobile phone; they are a little limited.
I look at that as well.
Hoping that The answer to the pi? soon....
Thanks for the help and the explanations that you give me.

I don't know who Edil, but I say to you that in the round there are many chinese sites (they are all from clones) that they sell at great prices, unfortunately, can't put links but if you are looking for a little bit with ****** you'll find them all.

Oooppsss I meant Exil77.
I apologize.... I am confused with the name.

If you want to levarti secures your mpps works or doesn't work I would try to search for the gold of your machine bed with mpps from other users and try to write it with your

just find a file with the same numbers hw and sw bed in the bdm that the mpps writes quietly in all, it's already done dozens of times, unfortunately the user may not download the file.

I have lent a mpps v. 13.
Today I tried it, and the result does not change.
I decided to have a galletto v. 54.

go to bdm,read your file and edit that,please ensure that it is original,put it in titanium and see if you recognize him in the driver,if it does not recognize it you have the same problem,just a bit, I change the checksum

I don't know how the f? in the bdm.
I don't have the equipment....

Quote:

---

Originally Written by Simone

I have lent a mpps v. 13.
Today I tried it, and the result does not change.
I decided to have a galletto v. 54.

---

Azz... and tell me this MPPA v13 and always in plastic around a cable?

Here I am.
Yesterday evening I deleted the software for my (v. 13), to upload the one that has given me along with the cable kindly lent.
Today, after a few attempts gone wrong, I managed to load something different in the ecu.
I just don't remember what.
At this time st? reading the file, and then compare it with the Ecm.
Sar? also a comic situation, I admit...
As soon as I have the result of the reading I update the discussion.

*Cinqueturbo: you ? always the model transparent cable.
Only the sticker on the plastic of the connector bears V. 13.
While my that ? the same ? V. 12.

No matter what I have at the moment in the ecu, the experience with this cable ? was negative.

I update the discussion:
The attempt yesterday ? failed.

With the help of a friend, this morning ? party from Turin to come to my house, we were able to unlock the situation.
Loading finally a different file.

He used a wing nut 2.
Then experience mpps completed.

Pi? late poster? the newly uploaded file to have your own opinion on it.
Obvious in a proper discussion.

Rngrazio all those who have intervened, and I have given opinions and advice.
Now I just have to decide what to buy....

with MPPS, Always stay away from edc16c39/9!! always BDM those ecus

sorry if I ask here but.....many of my friends have recommended the mpps V13 for my alfa 159 but searching here and I read that someone advises him not to.....*****and why is that?

I with mpps v12 (only version white cable)I have made many, many scriptures on edc16c39 and also edc16c8 without any problem then I switched to galletto v2, and I have a little set aside the mpps, but I never had problems with the mpps on these ecu's

for curiosity , since I never used it , I tried the letturae write with mpps the one with the box in aluminium, edc16c39 everything is perfect ... so I think it is a bug of your cable

Quote:

---

Originally Written by xathanatosx

sorry if I ask here but.....many of my friends have recommended the mpps V13 for my alfa 159 but searching here and I read that someone advises him not to.....*****and why is that?

---

Well the only thing that can make you discourage the MPPS is the restriction of use..
For example, if you just have to pick and write maps, MPPS is perfect, simple, and (except in reading) fast.
The Rooster is direct, gives you many more features and can interact as a BDM while MPPS no.
I hope you understand the difference and why is "despised" the MPPS.

in fact ... I know who I regalero' ....

"that" .. the regalero

Keep it, it always comes back as useful

Quote:

---

Originally Written by maku1977

for curiosity , since I never used it , I tried the letturae write with mpps the one with the box in aluminium, edc16c39 everything is perfect ... so I think it is a bug of your cable

---

The one with the little box in aluminum and very good I use it still, and for several years..
this done, a hundred cars of all brands..
Attachment 9630