Printable View
Good morning, I should soon read a Giulietta 1.4 120 horsepower, with a control unit 7.9.10. Since my v54 not expected to list in this engine, but provides for the Mito 1.4 120 hp, I could use this protocol since they are the same? Then seen that the reading ? virtual, has anyone ever had a write lock?
I have made several of myth, read the virtual and rewritten, no problem, the important ? that your tool has the file for your ecu.
And in case you do not have the file, where can I find them and enter them manually? Then, in looking elsewhere with the ecu data
Another question, if I write from the serial port, since the ecm does not calculate the checksum, the cock can calculate it without problems?
if you don't have the files you need to find it in any database, but you can't enter it manually, in the cock are part of the sw, I write to you, for the cks open the cock and watch.
Me and success the most? one-time lock on the serial line the cks goes colcolato before
How can I calculate it?
S? with Titanium I can calculate it, but since Titanium only reads files from 832, if the calculation on the file, and then I go back to the original size, I don't think that works or not
It works, and how..Quote:
Originally Written by amen
Thanks for the information I did not know, I thought that attacking after the file 64 sballasse all.
However, in the case of block I can write to the boot file that is read into virtual even if it is a Myth saw that the cock has just the one?
NO, they are two different readings..Quote:
Originally Written by amen