write the serial file .ori bed.

hi to all
some time ago, I made a copy of the BDM dell my ecu, restituendomi a file from 1mb...
on the same day, I had prepared a map and written in bdm,closed and everything is ok...
now I would like to make a small change,but I do not have the possibility to use the bdm...

then I would like to know if I can get comfortable in serial with mpps v13 or cock v54, precisely what I indicate that the edc16c9 can only be written in the serial and not read...

now read it to me is of little interest,because as I said, I have the file .ori BDM saved in the pc
but I wanted to know if I can write to the file .ori (only the file containing maps) bed BDM, if I can write it through the cock v54 or mpps v13
thanks to early

on this I have never tried it, but on many others with positive results, write it to the maximum you can always resume in the bdm.

you should go into the obd safely

so my file .ori bed in the bdm can write it without problems in serial (obd) right? I would like to have the security

To stay more? I am quiet, I read the current in the serial and will this...

the edc16c9 of the 1.7 cdti 101 is read in serial from almost no tool
my mpps not the law,as well as the cock v54 not the law... only write

And then, you have to try...in any case, you have the save..***** o the file should be equal only to that in bdm you can resume if something goes wrong in the serial, anyway, I seem to have read in to the serial port as your only I'm done with the kess..

but for now, I can't use the bdm... then I wanted to go to safe the file .ori bdm written in serial would not give any problems figured out?

the rule says how to read write and then you you want to take the risk to you of the final decision

i.e. what do you mean? risk something?

Quote:

---

Originally Written by bmw320cd

i.e. what do you mean? risk something?

---

the bdm file ? an entire file that contains all the data of the micro more tabbelle maps, dtc etc the file serial and only the area on the tabbelle of the maps now I don't know how you react to the programmer when you give a meal an entire file ? a thing of all the correct .
I do so if I have a reading bdm but I have to write in the serial, I'll refer to the serial reading and then I write that, and ? this is the procedure that I suggest

As a curiosity? also affects me on the speech.
Sometimes, in fact, be able to write the file that is read in the bdm serial port could help you save much Time.

Post off Topic invitation to move section.

Quote:

---

Originally Written by clabsport

Post off Topic invitation to move section.

---

what c'? of off topic???? as the user ? the state gi? in a press release that in the application of its specific ? gi? been responded to, has a edc16c9 file, 1 Mb read in bdm her tool v54 writing the file to the serial select only the areas of engine data, I always say before playing with the tool, no one wants to study first, avr? lost a day to ask questions, as a minimum, I personally have never seen a file that is read in bdm has created problems with writing to the serial..........

Quote:

---

Originally Written by passion engines

what c'? of off topic???? as the user ? the state gi? in a press release that in the application of its specific ? gi? been responded to, has a edc16c9 file, 1 Mb read in bdm her tool v54 writing the file to the serial select only the areas of engine data, I always say before playing with the tool, no one wants to study first, avr? lost a day to ask questions, as a minimum, I personally have never seen a file that is read in bdm has created problems with writing to the serial..........

---

hey there ciaooo ;)
actually I don't understand what is off topic but anyway...
for areas in the motor data,are all the addresses, and maps that manage the engine,without the exclusion of anything ? correct?
of course, without the other two files (I think they are eprom and micro),which contain the immo , frame , km and other information,which I do not need

Quote:

---

Originally Written by bmw320cd

but for now, I can't use the bdm... then I wanted to go to safe the file .ori bdm written in serial would not give any problems figured out?

---

the security you will never be no one, only you at the end if it all ? gone well you know some of the result for this time, maybe next you'll have problems.

Quote:

---

Originally Written by ugoboss

the security you will never be no one, only you at the end if it all ? gone well you know some of the result for this time, maybe next you'll have problems.

---

Ah then, even on the same ecu, you may have problems from time to time?

Anyway, I don't understand myself what is off-topic.

To make an example to clarify to all: get a car with edc16c39 we know who has the file to 2048 kb, read the file in seriele and we understand that ? tampered with, or with some mod, we ask the data base of official alien and cmd, and provide us with the file, take that file, we do our work and the rewrite serial,
the machine is in motion everything is ok, but according to you those files as they are? the file serial and the file bdm are the same size what to change? in the file serial there are areas related to the management engine and the equipment while in the file bdm, there are additional data that we do not need and that often are not even enabled, the tool, what the f?, knowing that ? been set to write the serial, at the time you upload the file to the sw, the window on the right, gives you the info of hw and sw that area write andr? to work, the tool automatically takes only the data for the function, the rest do not use them. Then a file bdm you can? rewrite the serial but not the serial bdm...........

Quote:

---

Originally Written by .Antonio.

Anyway, I don't understand myself what is off-topic.

---

off-topic out of the discussion, to better understand your answer does not ? in reference to the question

Quote:

---

Originally Written by passion engines

To make an example to clarify to all: get a car with edc16c39 we know who has the file to 2048 kb, read the file in seriele and we understand that ? tampered with, or with some mod, we ask the data base of official alien and cmd, and provide us with the file, take that file, we do our work and the rewrite serial,
the machine is in motion everything is ok, but according to you those files as they are? the file serial and the file bdm are the same size what to change? in the file serial there are areas related to the management engine and the equipment while in the file bdm, there are additional data that we do not need and that often are not even enabled, the tool, what the f?, knowing that ? been set to write the serial, at the time you upload the file to the sw, the window on the right, gives you the info of hw and sw that area write andr? to work, the tool automatically takes only the data for the function, the rest do not use them. Then a file bdm you can? rewrite the serial but not the serial bdm...........

---

Ok, thanks a lot.
But this is true for all the ecu?

Quote:

---

Originally Written by passion engines

off-topic out of the discussion, to better understand your answer does not ? in reference to the question

---

Ok understood. Thank you very much.

Quote:

---

Originally Written by passion engines

To make an example to clarify to all: get a car with edc16c39 we know who has the file to 2048 kb, read the file in seriele and we understand that ? tampered with, or with some mod, we ask the data base of official alien and cmd, and provide us with the file, take that file, we do our work and the rewrite serial,
the machine is in motion everything is ok, but according to you those files as they are? the file serial and the file bdm are the same size what to change? in the file serial there are areas related to the management engine and the equipment while in the file bdm, there are additional data that we do not need and that often are not even enabled, the tool, what the f?, knowing that ? been set to write the serial, at the time you upload the file to the sw, the window on the right, gives you the info of hw and sw that area write andr? to work, the tool automatically takes only the data for the function, the rest do not use them. Then a file bdm you can? rewrite the serial but not the serial bdm...........

---

even I know that in the serial , some of the tools only read the file from 1mb,precisely those parts of the engine, etc...while to read the entire file to 2mb it takes to force bdm,of course, depends on the type of ecu and the tool that you use it...
my problem ? the edc16c9 you never read, almost never via obd, but only write.... but thanks to the passion engine will now go quiet, writing the file .ori bdm from 1mb, serial ,hoping that I don't have problems with the tool...

The post and off topic no answers!! in concrete terms, here we are in the section presentations......
The discussion ( which, in my opinion, and very interesting ) is to be moved to the appropriate section..

Quote:

---

Originally Written by clabsport

The post and off topic no answers!! in concrete terms, here we are in the section presentations......
The discussion ( which, in my opinion, and very interesting ) is to be moved to the appropriate section..

---

You have reason perfectly, since I spend a lot of interventions and still is the basis of departure , for the user's bmw let go of the other tools here, you're discussing if a file with the bdm of the characteristics posted by you if you can? be rewritten in serial, and I said yes..........