Printable View
I forgot how the control unit is mounted on a magneti marelli 4af hw204Quote:
Originally Written by Alessio93
check the hose of the pressure sensor
manifold pressure how much is it?
gated pipe pressure right , is a flood of white smoke, thanks for the reply
then eat the oil, the spark plugs as they come out?
? for the case of the fire engine?
the injector according to the cylinder!!!!!!!!!!
you have blown the head gasket.
But to the coil as it is? The machine consumes water? The first to manifest the symptom permanent in the morning started at three and then go well?
if it smokes white, or ? oil or water, you have measured the compression?
I bet that a candle has a different color from the other
the ecu???mmm that defect can have!!!white smoke!!mmmmmm if it does not burn well the gas the smoke ? black(white smoke=oil or water in the form of steam)alessio I will give an explanation how an ecu can' to make white smoke?
But in the diagnosis of that error are???? I ? happened something very similar situation to yours, and it was the water in the tank, I realized why? the inlet pipe of the gasoline was perforated, and when it rained load of water
So guys was just as I thought I did test with oscilloscope on the injector n2 and I vistoche the wave shown on the screen was ziglinata compared to the other afternoon I went to the break I took the ecu, the scodificata and the machine is a wonder. the white smoke that seemed to be burning oil was caused by one of the two probes that tomorrow you will try? to see what? and I hope to complete it so I feel better and I know thanks to all
noe was oil and what was it?what does' the probe to make the white smoke?could you explain it to me I do not understand what it can achieve.Quote:
Originally Written by Alessio93
ps.thanks to you all for your helpfulness