Printable View
Hello, I accquistato a ktag, on the inside for? missing the power supply.
Do you know if ? equal to that of the bdm 100? looking at the pictures ? equal and has as output 2A.
I am a beginner, do you know if ? always need to use the power supply for a read / write?
If a write-in ktag I lose the power, and it crashes, I can save it by rewriting the backup?
hello,the resume,so you have to use power adapter!!
have you had issues with the almentatore supplied? I heard on some sites that it would be better to a power supply with at least 3 To output, and that the one supplied on certain control units do not work well. Among other things, some people say that ? best to take a stablilizzato and that the 0.5 amp output is sufficient for all control units. I need a third your opinion, not s? where to find one and that is going well.
3a and go safe
0.5 To are a misery!! as said Frantik3 go with the 3RD and you're clear!
also I thought the same thing, are just a few of 0.5, but for stabilized are the super*****laconloscappellamentoadestra right? I think that goes well into mobile phones, it just has to be 3 amps max output right +-1%?
Be those of mobile 3RD not come to us manco with the binoculars... If you want to be sure you get a 12V stabilized by 3-4A, cost around 50euro, even less. Then, if you have the budget get the adjustable back is always useful. Stabilized means that if you must provide 12V not throw out 8 or 15, but 12. My advice ? not to never skimp on power supply, then everyone does what he believes in.
You don't have an old pc thrown away somewhere!? The switching supply inside of the pc is very good for this type of application, outputs perfectly stable, and quite a bit of current! Not less than 10A!!
put an external power supply good stabilized,the ones supplied to me were blocking the edc17 fortunately recover easily...
if you want to work with serenity and buy a good stabilized power supply ....money well spent!!
A link you can post about which power supply to buy and use?
Thanks :)