Printable View
Hello to all. Today I tried to read a edc16 c39 an alfa 159 from bdm . But nothing to do. The rooster is not is . Now I would like to buy scedine spring that you can use with the galletto v54 european . Who I can? advise where to find it and also the Template .
I wouldn't worry about it to understand why it is not connecting, as you have made the connections.
Attachment 8718Attachment 8718Annex 8719Hello ugoboss . Look at the photo
We explained to him as well as connect the rooster with the coupon and the control unit . And also the first time that I want to read.
I saw that your e xxx not ? as the usual (very nice) and I do not know, I know that usually it takes the adapter in the middle between the cock and the e xxx.
if you have a bdm go with that
*alex :
Do you mean the bdm 100 ?
Ugoboss. Can you see through a photo such as colleges all, and which coupon you use. Sorry for my ignorance
very probably the one skedino not good for the cock, then try it with the adapter in the middle if it works
x ecu ec need adapter interposed the one with the led!!!
Ok Thanks Tomorrow we tried again and I'll know .
The adapter as I have to connect . The Flat cables't know how . For? I don't know if
Do I have to connect as well with the switch .
sure that you connect the switch ? from them that food to the ecu, look into the documents of the rooster we are all the photos with explanations.
it seems the e xxx original of the cmd, but be careful not to play too much with this ecu, from the port bdm're giving 12v I would not like that if you fail to send the 12 v fry everything. check that they have also fixed the flat connection, I ricordoc he in the past, some chinese sent them reversed. anyway with the classic schedule chinese no problem, just who frapponi the adapter, check that the adapter is just like the manual of the cock in the first pages.
Where can I find these coupons the classical chinese . I those not c'? I . In the network I do not find
I can't see the images yet , but I assure you that as someone said, you have to put between gallo e xxx the adapter to be able to use the schedule-spring model cmd,food, l? the control unit,check in doc cock how to make the connections,to abide scrupulously,makes you see everything, and you'll see that it connects,I have read various.
go on ****** and write "frame."Quote:
Originally Written by 159sportwagon
Annex 8733Compartment these good ? For? not c'? the small adapter that you put between the rooster and the coupon
but what says the cock that gives you the error
I do not remember . In these days, we tried again. Then I attach a photo
the adapter you have supplied with the cock.Quote:
Originally Written by 159sportwagon
If it can? help you can you please post a screen very clear where there are the pinout of the cock and where they correspond on all edc16, using a voltmeter/tester to check that your wiring matches. I would highly recommend the eye, especially to the pin where it should be 12v.
Attachment 8919
if it can? help you, take a look at my template selfmade, a bit rudimentary but perfectly functional.
You can also see the e xxx grafted between the two flat cables that provides the 12v power supply.