Printable View
Hello guys, I have a audi TT to do already? previously mapped, it should mount as a unit a ME7.5..
I have performed the reading of this machine with MPPS V12 OBDthe reading ? was successful, only that the file that I got ? from 1MB.
The strange thing, ? the file should be 512Kb , in fact I found the file .ORI on the network ? from 512Kb..
Which file rewrite with MPPS, 1MB or 512Kb..?
always write what you read.
Made Audi A4 1.8 t with the same ECU with mpps no problem
Have you read you a file from 1MB..?Quote:
Originally Written by oakley1
You made it by OBD or in the Boot..???
I confirm the file from mega
Only that it seems this unit is mounted on a Eprom 29F400, which should contain 512KB, so in theory I should not only read a file from 512Kb..?
why? I have a file from 1 Mb..? is read, the other area of the map?
Test d-open it with winols and see if you recognize
Grz thousand of intereventi..Quote:
Originally Written by oakley1
However Winols can open and recognize a gi file? mapped (why? the file to 1MB, which I read was gi? mapped)..?
Also after that I opened it with winols what can I fix that..?
The file of the
You have to compare with one with the same sw to see if ? mapped.. If not it gives you the data that is likely the file and read wrong but I believe that mpps have read it right.....
Really? the comparison of the I have already? done with the file .golds that ? from 512kb, and my file to 1Mb ? mapped and perfectly coincident to the 512-Kb, only that it has an area of map in ir? (probably Immo and other things..).
However, there are others who have read a file from 1Mb with MPPS and have rewritten..?
P. s. Grz Oakley1
Oakley1, the AUDI a4 1.8 t that you did, you could give me his number HW and SW...?I would understand that eprom mount your ECU..Quote:
Originally Written by oakley1
Thanks..!
post the numbers hw and sw of the file.
These are the identification..:
HW:0261206439
SW:1037354510
Vw Software Number: 8N0906018Q 000
I checked and it should mount an eeprom 29f400 from 512kb
Oakley1, the AUDI A4 1.8 t that you had made, that number HW and SW...?I would understand that eprom mount your ECU..
Thanks..!