elimination fap on fiat sedici 1.9 mjt

hi to all
I should bring in the workshop a fiat sedici 1.9 mjt 120cv to remove the fap.io I have the time sensor decoding. goes well on the ecu edc16 that fits this car?

it works, doesn't it ? the best solution as it is a time that even the much-renowned *******h on these ecu over fap you eliminate 80% of the table the dtc for? the fap is turned off, this ? certain

but I have to also remove the dtc, I believe, why? the indicator light is on. problems of regeneration.

I think that it is necessary to control it by hand after it is past time.. please contact the service of the forum..!

can I post the file once changed to a control?

go sure I did it 2 Time a year ago, never a problem, of course you need to do physically delete

it works, but as already said reset many dtc is not related to the dpf.

go quiet made the most of a never had any problems......

Ok, I can do then? The exhaust physically does the customer

I have made several and I have not had any problems

perfect thanks a lot:)

go quiet time for these is also good if you actually delete too many dtc...

ok perfect thanks a lot:)

the important ? that there are no problems in the car

my personal experience, I have removed the two egr is a citroen edc16 and is a peugeot 206 and none of the two times we got it... sometimes (for egr) excludes a single curve and then for me ? always better to know the procedure and it does not rely on a software...the real software that eliminate safe for both fap that egr cost a pretty p? of soldini

the defappatura instead of using ecusafe what do you think? thanks

watch I'm excluding the fap to a marelli MJD8F and I'm working on the software to get up to a certain point then you have to put your hands to yourself:)

With time the fiat sedici do well in both egr fap. The problem ? in the future. Time smoothes or all of the dtc. If you can activate the dtc, you can also use time on this makes you a nice job