hello to all
I have my friend, the owner of a stylus that has a problem with the sensor, passenger airbag.
you have never solved these problems?
there is an emulator something to bypass the weight sensor?
thanks in advance
Printable View
hello to all
I have my friend, the owner of a stylus that has a problem with the sensor, passenger airbag.
you have never solved these problems?
there is an emulator something to bypass the weight sensor?
thanks in advance
the systems are two or emulator or remove the ecu read the dump of the original and with a sw change without presence with a cushion, then write in the control unit and on.....
which emulator do you recommend??
clearly the dedicated one, and like the other see you....
if type through some diagnosis program disabiti the sensor ..?
the dump ? stored in the eprom of the ecu must be unsoldered read the file in bin content, and then changed I don't know if you can? to make the diagnosis I would have never heard....
save in the diagnosis that I know is not possible, I have made a lot of re-writing the file
on some units I through reading the dell drivers but you have to read the serial to see what kind of ecu'!!!
C'? a way to emulate the resistecia carpet, remember that ? can emulate for busy or empty ? preferable to emulate as busy, so that in the event of an accident activates the passenger airbag.
They also sell emulators, as you know, at a price of 70-80 €. Of course, pi? economical to buy a couple of resistors, but also their work and skill.
If someone is in need, when you find the tutorial I get stuck here. Greetings
I confirm, the diagnosis is not you can? to exclude the sensor weight, only via file, which to me is not always ? managed, maybe a couple of times, or you can emulate the weight sensor with the emulator. the price for? ? pi? low, at least the ones that I use....
let me inform you, the weight sensor occupant, ? a control unit that takes the strength data, and transmits to the airbag control unit, from the data line K.
Pu? emulate the input resistance of the unit? occupant, for this transmission to the airbag control unit.
Greetings
From the control unit, you can disable the passenger airbag without problems,read and e-mail the file!!
Sorry I have not understood well by modifying the ecu, you can disable the control of the sensor on the seat or off just the passenger airbag?
No sensor is off of the seat, you need to read the 95080 that c'? in the control unit of the airbag in the mail file, and then is placed't have ir? install the emulator and fix all.............Quote:
Originally Written by angel
Ok thanks for the info, but in this case as it involves the control unit, as there was a passenger in the event of an accident opens the airbag, or vice versa?Quote:
Originally Written by sno74
Hello, tried the easiest thing?
From a clean contacts, and test the nn are lenses in the more you can turn off one of the seats wheel.
Hope that was useful,,,,,,,,,,,,,,,,
exact does the same thing on the emulator in case of an accident bursts drivers why? the ecu thinks there is sitting someone, or put the emulator or change the dump the same result........Quote:
Originally Written by angel
exact deactivates the passenger airbag finally,I also believe that in this operation go also to save money by not buying an emulator.....then do it a rating!!!Quote:
Originally Written by angel
carsoftware 5.2 it off well?
hello guido,I honestly never tried it with carsoft,the mod in esa manually!!Quote:
Originally Written by guidotacco
Very good, I have always done with the emulator I.
Sincerely better to do the dump I made some 3-door with this problem and then maybe slide the seat tore out the wires from the emulator, and then me ? back the car if you do dump go quiet that the car does not come back pi?........
You ? only true that I've never thought about. The important ? the airbag functions anyway.