Guys I open this post to know if we are the owners of a k-tag alientech official and to know if you are good with this tool that I personally use a bit of time.
Printable View
Guys I open this post to know if we are the owners of a k-tag alientech official and to know if you are good with this tool that I personally use a bit of time.
I'd be very interested too in this topic, why? the K-tag ? the state insisted to me, but I don't feel like making an investment in the dark...
I would like to exactly know how it goes and if it is worth the expense...
Thanks!
the problem ? you need to open up the ecu!
Not a problem to open them after a while, we make the streets and not to sweat the most?Quote:
Originally Written by guidotacco
when you open a certain someone still when I see it makes me shudder
but with a little patience you open
It all depends on the type of work you doQuote:
Originally Written by bart
I am fully satisfied of the Alientech
you pay pero personally it's worth
the assistance alientech ? really very good!
for me, those in the business of the profession must begin with a kess and then made the right practice to make an additional effort and take the k-tag
I have done so?, for now, where I work, we have the houses at the end ? in July and that smanettiamo on the ECU for processing and fap, time and another two months to amortize the cost of kess and then the next expense will be? the k-tag, I've seen it in action and I am fully satisfied
So basically the K-Tag, what differs from the common BDM?
for bart, really? the K - Tag, no ? other than the new interface BDM Alientech, of course, with the implementation of the new protocols ? a great product, why? compared to other houses that deal with these products (what purchases ? totalmete your including the protocols, and if you for problems if I could not do more? the annual subscription what you have bought will continue to operate) of this type of course, if you do not pay the annual subscription some interfaces stop working. If avvessi more chance? and some of the customers in the pi? acquisteri without thinking twice?
Thanks dolphin, you have been very exhaustive, I now ? pi? clear! :)
You usually use? How are you? Have you ever had problems using it?
Again, thanks! :)
Unfortunately, at the moment of interfaces, the original I have only Bdmpro of Alientech, I would like to buy other interfaces I look forward to the moments most favorable and some of our customers in pi?. But if I could I would not hesitate acquisteri both the Kess that the K-Tag. Hello to soon
I don't know if relevant to the discourse (the case of interfaces clone) but me ? now, after a **** from a sellers chinese version k-tag clone anyone heard of it or ? a hoax?
no no ? a hoax but first you need to see the real operation soon we hope to carry out tests.
I found more info on the clone, for the moment, is a unit? slave that works with the same sw of allien
yes I saw it as well I do but before I would do a test and then let's see if someone takes it perhaps shows his experience.
I have seen the action on the K-tag and I have to say that it is a good product pero ? very slow compared to the cock, and in two cases I have damaged the ecu and I had to cestinarla,the reason is not known.
Quote:
Originally Written by filippin87
The writing ? was made by a person that I know I have made but I was there.In practice, both were med17 after writing a proposal, but there was the engine light constantly on and gave defect camshaft sensor also restoring it nothing alientech ? was called immediately, but they said nothing.The second after the programming was ok, but only that it could not rewrite the boot also here called alientech, and they said nothing I tried with my cock and nothing (probably had damaged the track of the boot).
I have not had until now no problem but you never know, better to know these things before with that version of the k-tag and success?Quote:
Originally Written by dolphin
If you are talking about the firmware, I don't know, however a last year this period, and in July,I trallascito to say that we had done about ten scriptures,for this I don't want to take anything to the k-tag ? really great.
I have K-TAG full , all the protocols and all the schedule and for now no problem and the ecu will do enough.... c'? always a first time, but if you follow step by step all the instructions ? really hard to go wrong !!
Quote:
Originally Written by the ecu.autotecno
hi,do you aspect in the presentation section to answer the questions you've done in your post.
sorry you can specificara what kind of sw and' what it does reads and writes, or serves to map? thank you
it is a programmer's official tour to the ecu of the latest generation.Quote:
Originally Written by marco
? higher than the bdm?
in practice, it is a bdm and more makes all the ecu's of the last generation thing now that the bdm does not make it the most and I would say that so retire.Quote:
Originally Written by sportknight
but for the bdm does not come out the updates for the new system or do you think it is a hardware limit?
gallett* jha and a bdm most updated!!!
as a happy owner of the k-tag by a year,including jig and schedule spring... semplicisismo-to-use and full, nice,just something to nn and clear technicians alien are available. as someone said,the expense is not contained,but you have the certainty of having in hand a product really well done...in the end you pay for the experience and the study of the ec behind. the k tags in the if to produce it, it costs 5000 euro for sure...
but bdm is also the edc17?
It makes
Go to the website of the alientech download the list of protocols KESS V2 and Ktag c'? all that is
is it anyway in the boot as it seems..
or I got it wrong and makes bdm with the schedule?
Use the e xxx on pitches balances the wire boot, which is then connected to a quick release clips on the e xxx the same then start the procedure
just with e xxx
I'd also like to buy Alientech but does anyone know the prices?????
I took kess v2 + ktag with all protocols and schedule of the spring,six of around 10000 euros...Quote:
Originally Written by cristianbomberos
beautiful figure :cool:Quote:
Originally Written by voglioimparare
quoto for the master version about 10000 €
Guys
can you tell me if the schedule cmd that come with the template go well with the k-tag?
(I have the clone)
I have just tested with a ecu bosch and the e xxx bosch (of course) ? seems to work well.Quote:
Originally Written by darksoulbreaker
hi I have tested with shetino bosh but can you tell me if the file that you read with k-tag you've read even with another program if the file is large the same?