Printable View
I'm trying to delete from the map l egr on this car, the alfa brera 2.4 200 hp but have not succeeded with the exclusion of time of carsoftware, why? making the diagnosis activates the valve is working, why is that?
Give me an eye on where I was wrong?
Search on the forum for the discussion edc16-impariamola l? it seems to me that you find everything that you need to delete the egr without the use of software just to change a few curves and you're set. If you don't find anything as soon as I can you place the screen with the right addresses. On my 159 has the same engine as your works greatQuote:
Originally Written by michele30
I think that it should be so
don't look at the valve if working in active diagnosis, you have to look at the engine though ? always off, both at idle, accelerating, and at the time of release.
in theory, if the control ? closed well should not work or you?
legendary... have you tested this mod, I thought too but I have not tried.
the area I tested it a thousand times in this soft will change slightly the sequence but are sure to 99per cent that they are the controls and test faccci know
I did two tests, a hair before and a bit after closing, but the valve is working
you do not have a screen for me to see?
but you watched it on the bike if it remains off.Quote:
Originally Written by michele30
they are a piece of junk, I have done things Saturday morning that look, will be why? on Friday, I was late..
from the diagnosis control off and egr valve to 4 % and then everything is ok...
sorry raga.
better that way, but for curiosity' which file you used.Quote:
Originally Written by michele30
in the end I left the last file that I had carita , the cio? to car software , but I think that it is ok also time .
you both make the mod right on these ecu
If you have not solved tomorrow, can you please post a screen