Hello to all , c'? nobody can know where you can move from map to increase a bit the minimum on this machine?
The owner complains that the turns off,( even if already normal ) and then I would maybe turn it up a bit to give it a try.
to the file:
Printable View
Hello to all , c'? nobody can know where you can move from map to increase a bit the minimum on this machine?
The owner complains that the turns off,( even if already normal ) and then I would maybe turn it up a bit to give it a try.
to the file:
hello, anyone who can? indicate the addresses for the minimum on this ecu?
Look for the cause of the problem instead?Quote:
Originally Written by michele30
Those cars lack of group butterfly collector, we recommend you to clean it well, after that do a reset of the parameters autoadattativi and a configuration butterfly diagnosis, most of the time it goes to a good end
right,
they are very sensitive to the butterfly dirty or off...
the parameters autoadattativi them you have tried to redo it?
it would be very interesting to know the addresses of the minimum.... anyone?
Hello all ,this machine is equipped with imp GPL? gi? from new these machines are very low minimal, it would be interesting as it raises the idle engine.
hello, no I can? help find this ecu addresses of the pedal map - maps of minimum - advances and injection times?
or at least one of these?
If mounts LPG or cng system, there are solutions for it to turn off when it falls to a minimum
clean body afrfallatoa cold, put it in the bike car without tocacre accelerator and do attach the fan to 2 times ...you see that the minimum is stable!!
Charles the procedure you described ? valid for the French Peugeot, Renault, citroen, for fiat, I do not know this procedure
because l haven't tried???to say that is not a on the 500....
Those cars and happened that can hold the minimum even after changing the battery. Sometimes you just have to give us a ride of a few miles all back to work. For? not ? an official procedure, while for the French if you want to do the adaptation
You have to do the procedure you described above
To me ? ever see a 500 cn the unstable idle
interesting discussion guys, I follow you with pleasure!
clear faults in the ABS and see if solve
good files
If I remember correctly in the dealership perform an update to the ecu IAW precisely for this problem of unstable idle. However, they must check with the examiner if the unit in question requires it
you arrived just a little late post of at least a year ago' greetings
Happened to me on a y 1.2 16v had the screws under the throttle body loose...then you'll want to remove and look at everything...
;) ;) Yes thanks I had seen however, for those who the law can always be a' more information
guys is it true these cars are a bit special on the low but he has asked to know what are the addresses of the minimum not the other....