hello to all
someone kindly could postarmi pictures of the inside of the lexia 3.. especially near the connector side obd rear?
I lost a resistance or a capacitor smd... and I do not find it more ..and now the tool does not detect more ecu.
Printable View
hello to all
someone kindly could postarmi pictures of the inside of the lexia 3.. especially near the connector side obd rear?
I lost a resistance or a capacitor smd... and I do not find it more ..and now the tool does not detect more ecu.
the chassis is ?
hello techno
the chassis is.. tested on 3 machines... and on all 3 the same defect
I found something see if it goes well, are a bit blurry
http://www.sendspace*****/files/twoj55
hello giarras thank you for the photos and congrats on the new charge
looking on the net I read that it replaced the ram,but I don't understand if you need to my problem, or the problem that is not recognized by the pc
thanks,......which sw do you use? we see a p?Quote:
Originally Written by pinotec
lexia 346.22 and pp2000 23.25
then I do a tour ok?Quote:
Originally Written by pinotec
ok thx giarrass
see if you can be helpful.Quote:
Originally Written by pinotec
http://www.sendspace*****/files/wv65eh
thanks again giarras you have been vanche fast...
tomorrow I update the lexia.. but according to you,so I solve my problem?
in the meantime, try to update maybe using xp, any dediamo what can? to be a success.Quote:
Originally Written by pinotec
azz, the anti-virus is blocking me the website I try to turn it off
download with 1 Browser, you will see that the vQuote:
Originally Written by tecnoracing
you are able
ok do everything, see, or maybe use xp. let us know hello and good luck.Quote:
Originally Written by tecnoracing
*tecnoracing but you also have the same problem?
I had about 2 cars but I tried on another it seems that it is working but my version and the LEXIA3_V45 now or tried to download Lexia3 Update (v347.99) what we have here
but when istallo asks me for the activation code which I don't have
I wanted to install this lexia on another pc while I have 2 a citroen c4 picasso and c3 in the workshop I stastarlo
does anyone know how to turn it on the version that I had previously before you istallava and after it is activated using the keygen this asks me for the activation code already from the installation
today, if I have 2 minutes I can confirm....
anyway, I also found the sw psa interface checker.. to upgrade or downgrade the firmware to the interface
I tried to riflashare my with the firm 4.2.2 (they say that is the most stable)
I just plug it in to the machine.
but this version how to install it asks me for an activation code and I do not go ahead
giarras where do I get the pass ?
Quote:
Originally Written by giarras
have you tried to enter your pass txt.... perhaps the same
is there? tried to be letters and numbers, someone will have to? have them
passw:scary01 - could serve to others.Quote:
Originally Written by tecnoracing
have you solved? we give news, thanks.
giarras I at the moment I have problems with the interface even longer detected...
I believe that now is the time to get it again
when we took that has never worked 100% :(
someone can tell me if the lexie chinese are upgradable to diagbox 7.xx ?
I've updated the original and I think that if the hardware and an exact copy should be possible.
Has someone tried it?