Printable View
hello all,
I have to put the sport seats on my car ( punto evo mjet 2010), but I have airbags in the seats of the original and if they are out, I turn on the malfunction indicator light and the structure of the airbag does not work... how could do not to turn on the light and operate all of the others?? I read on the internet that you just need to put resistors 2.2 hom but he is afraid that burst all....
the exact place of the resistance 2.2 ohm 1/4 watt on the plug that remains disconnected.
the resistor simulates the value of the resistance of the airbag cushion, comfortable that it is not broken anything :D
Quote:
Originally Written by magi1984
why? of the resistors and not one for the airbag? do the horns which an accident happens, and pop the airbag, the resistors that make??? warm up?
put a resistor for each pin that you leave disconnected
in the event of an accident if you do not break out the drivers you'll hurt yourself, here's what happens
in fact, I wanted to know, with certainty , that while putting the resistances of the other drivers work perfectly...?!?!? altriemnti you can't? act via the airbag control unit??
I have gi? said that putting the resistance, nothing happens to the other drivers.
a client of mine has put a sports steering wheel on a mini cooper prepared from the track, of course, had the airbag light on, I told him off by putting a resistor 2.2 ohm
GO QUIET!
Quote:
Originally Written by magi1984
ok, let? cos?! ? can people on the ecu and exclude the airbags?? if ? you how can I do??
I don't think it's possible...I'm sorry
but this kind of thing okay?? I have translated but I do not yet well understand if you need to do not sound in the buzzer of the passenger side when it doesn't put the belt or if I really v? d-emulate an airbag.....
here is the link:
http://www.ebay.it/itm/180800153780?...84.m1423.l2649
hello, or resistors, or module in the event of a collision the airbags do not work
as far as I know for the BMW ? can via release turn off the lights why? maybe the sensor weight is ruined and you want to replace,
and in the case of an accident? the airbag opens.. even if the place does not ? been busy... or ? busy, but not the belt inserted....
then c'? I have in the c..... why? if I put the resistance does not work the other?? at the end of the resistance f? s? the ecu reads that the airbag ? alaid no??
all work airbags, quiet
you have to see the principle of operation...
why? in the bmw f? cross-checks...
try to go to a workshop fiat authorised with balls ... and ask...
what can you do...
apart from that they are not bad, the seats of the abarth ...by...
the abarth seats are really beautiful, but if I have to spend 600 euros for seats used to do before I buy the fk new or have I found like sabelt( tarot), but practically the same with the body behind carbon faux 300 euro including new brackets.......
for the drivers, I've seen that on the abarth put the sabelt no, and these do not have airbags and it is precisely the fiat d? of modulini to 30 euros each, which emulate the drivers, but how do I get the certerza that in the event of a collision the other work?
then if you have the light off work 1000%
they will burst on the basis of the impact...
ehhh magariiiii.. why? many*******ni that sell the tsi modules, them plan so that you burn the light of the lamp or anyway something like that cos? do you believe that the light is turned off and go quiet but really? you only have the light that does not work, example: the little who sells the simoni racing...Quote:
Originally Written by ALFAJTD
but the light ? a failure... reported via the can communication...
I don't think that it is possible to an over-voltage...
and then they do something that f? to turn off the light why? in the little of simonic'? 's just written that deletes only the light and just and does not guarantee the proper functioning.. so I wanted to cheidere to you if you know how to do x to have a correct operation of the airbags and the light is off...Quote:
Originally Written by ALFAJTD
but you have not said that with 30 euro fiat by herself of modulini for sport seats without airbags?
if ? cos? the slopes of those...
and you're comfortable that everything works..
yes, but the mechanic told me that it is not certain that then work really.....!!I tried to ask you why? maybe someone of you had already? the fact I'm working and had to jinx tested if the airbags work.. I try.... we hope :)
reading around, precisely, put a resistor..
c'? a procedure for the installation... with this simulerebbe the presence airbags for every seat...
as you say the dealer that sells the seats sabel provides the resistor together.
as I have described above, the lamp goes out, and everything works...
even if I am opposed to eliminating these devices for the simple fact that in the event of an accident may not pay the insurance
why? tampered with a safety device... saw that the car was equipped...
on the stylus, for example, just reprogram the eeprom of the airbag control unit with a small change to the software turns off the light by mistake passenger...
you ma ? different situation, what ? the employment passenger seat, another ? remove the drivers side seat
I would like to just remove.....
this I understand...in fact, I have said that I put the resistance 2.2ohm 1/4 of a watt and you will see that there will be problems.
light is off and drivers operating in the event of an accident
ok, thanks a lot for the help.. :) to? cos? and then I say..Quote:
Originally Written by magi1984
I confirm that I work
Buenas..., para simular a drivers, the resistencia generally, debe de estar entre 2 y 5 ohmios, yo utilizo 3,3 ohmios (for example, a value of m?s equilibrado). With esto lo que se consigue es enga?ar to the centrality, para que no entre en mode damage y siga manteniendo el operating system.
Para sensor de ocupante es distinguished, este system lleva a m?dulo que transmite por c?digo cifrado (K-line) hacia la centralita de drivers. Place it so not just with poner a resistencia es diferente para cada modelo. (bmw, mercedes, Fiat stilo...por ejemplos)
.
ITALIAN ****** traductore:
Good ..., to simulate an airbag, the resistance in general should be between 2 and 5 ohms to 3.3 ohms that I use (it is a value of pi? well-balanced). This ? there? that you get ? fool the ecu, so that is not the mode? failure and continue to keep the system operating.
For the sensor of presence ? different, this system has a module that transmits the encoded code (K-line) to the airbag control unit. So don't just put up a resistance ? different for each model. (BMW, Mercedes, Fiat Stilo ... for examples)
Greetings