Printable View
hello guys,I bought at a dear friend of mine, a ktag clone online,and already in there, I wanted him to buy a template with the schedule spring..now my question is..............the schedule spring that sell in network those x gallo clone, they go well with on ktag? the pinout and the same compared to the ones that you use for the ktag i.e., those that distributes alientech? thank you very much, and merry christmas to all!
The schedule of spring-both are fine for ktag that for the rooster, is the connector ? identical, to use them with the rooster of course c'? need the adapter. Ktag associates it directly on the e xxx
thanks a lot! then the attack on the order the template and the schedule;)Quote:
Originally Written by Alfa159 q4
I'm considering buying the ktag on the internet and the schedule, but I found an indication contradictory (maybe).
it says that the unit can? use the schedule to spring on sale on the website but ? required an adapter.
where is the truth???
? difficult to give advice without understanding what schedule you speak.
Tonight's poster? photos of the link cos? sar? pi? clear
Guys be careful that the schedule spring are of the form different from the original and may mislead you when you need to place them on the template
These I have them clipped, were originally round for use with another template.
Both are fine for ktag that cock(with adapter)
As it says in the admin c'? careful not to make mistakes to, marelli and siemens to the maximum, not the law, but on bosch where the power supply ? date directly dalo e xxx, you run the risk of burning something.
Quote:
Originally Written by Alfa159 q4
exactly! these I have seen with the template equal to your! then if it goes well with ktag and a good thing.... when you do the tricore ec a e xxx dedicated as those "official"?? thanks a lot!
No, I built it.
Otherwise balances directly on the pitch
Are those for edc17
perfect!! thanks guys you have been very clear!!!
I forgot that for the dense if you must make them by welding the wires, and a large break of..... there are about 10 wires to solder to read and 10 to write.
hello guys, as you do for the marelli 8df? I'm looking on the net but I can't find anything specific, I was thinking to build it, you advise me something???
If you have the desire and time to the build, but once you've taken manualit? solder does not ? then cos? difficult.
Ditto for the dense
So the only solution and build it or change un9 of the old series...
I have seen some diy for 8df, and it does not take much to thick I think we want a little more, so far I'm welding.Quote:
Originally Written by rdponline
Watch it doesn't take much to build them, you buy the board, the copper, here in my part 100x70mm paying 2?, make the design of the circuit with paint the ports have a hardware store that also makes the plates and the game and the fact, in an electronics store to buy needles and grafts to the flat, balances everything... and it's done... but if you find a trade already beautiful and done and much faster...Quote:
Originally Written by ugoboss
Hello, x-8df I use the old board of the cmd with the cable adjusted to the pin...
Well I think that I will do soQuote:
Originally Written by todos
if the old ticket cmd, do you mean the usual schedule bdm, you can't do this because the pinout is the same of the e xxx is different, and also changing the position of the wires on the pins of the original does not cover the links.Quote:
Originally Written by todos
ugoboss the marelli I make them all with the scedina is 8df and also? 8f2.......Quote:
Originally Written by ugoboss
surely I do not understand, I could take a picture of the e xxx when you use it for the 8df as you connect the wires, thanks.Quote:
Originally Written by todos
If we talk about the e xxx official, well you make them all, but since china does not make them still need to change them e xxx marelli traditional. Then I even made the schema to change it, only that I didn't have time because in these days of celebration, I have to diy a nice jig adjustable, and everything in...Quote:
Originally Written by ugoboss
but you're talking about schedule official or chinese clones.Quote:
Originally Written by todos
I am speaking of the schedule, chinese...Quote:
Originally Written by ugoboss
I was talking with todos :-)Quote:
Originally Written by rdponline
Ah sorry I did not grabbed... anyway do you think has the e xxx ori because the old marelli has the same pinout, and then you are going to jtag
ugoboss the coupons are original and you just need to change the flat ch? colleges the coupon on the type of bdm or jtag..Quote:
Originally Written by ugoboss
ok if you are gold, you didn't specify, and I know from experience that with the chinese ones you can't do it.Quote:
Originally Written by todos
Hi everyone, tomorrow I should read a marelli to a 1.3 mjt for the first time,I was giving a look at the various links and I noticed that the power supply of the ecu must be given to the comb, and through the cable with a different pin-out.I was wondering now what is the use of the switch on the output of the various pin,checking with multimeter, I measure always a power of 12.3 volts more or less contact open or closed...known to disalimenta only the white connector on the bosch use to power the adapter of schedule in the spring.I'm if doing something wrong?I'm also inserting the adapter in cdm between e xxx spring marelli and galletto v54.risk something if I am wrong, the position of the e xxx spring?or should not be read only?thanks to all
the marelli the food from the comb, the adapter must be placed between the cock and the e xxx, spring and "not" go, powered on, e xxx has, of course, the verse that is to be respected otherwise you can ruin the ecu, also if many say that powering it from the comb do not ruin, do not trust it, I don't know the verse so about two feet but there are documents that explain it, I forgot the adapter has its own verse, if you look in the documents of the rooster there are a lot of photos with explanations.
Thanks Ugo, after checking for good connections and see how it goes,thanks for everything and good day