Info about fix miles

Hi to all,
I would like to ask more? info regarding the correction of the km framework.
All corrections should be done by dismantling the framework and it can be seen, or there are alternative ways to vary both the reporting on the framework that the odometer in the diagnosis?
For example, fiat group, edc15c7 - edc16c8 - edc16c39

are not very well informed but there are tools that make it a good part of the car, but what do I know besides the fact that someone is not obd but you have to disassemble the framework strummenti, the km change them only? but the km real you remain in the other control units depending to the car ( engine, transmission, abs, etc), even if in the pictures a p? old you have to unsolder

Hello, it depends on the type of car, or better to say on that type of framework tools and eeprom you need to work, some you can do from the obd, while others need the framework tools disassembled to read the eeprom, and others of the canfilter.
To do a job well done, you must not only work on the instrument panel, but also on all units in which are listed the miles of the car, simple example of bmw working on the framework and on the cas.
Best Regards, David.

Quote:

---

Originally Written by davidemx

Hello, it depends on the type of car, or better to say on that type of framework tools and eeprom you need to work, some you can do from the obd, while others need the framework tools disassembled to read the eeprom, and others of the canfilter.
To do a job well done, you must not only work on the instrument panel, but also on all units in which are listed the miles of the car, simple example of bmw working on the framework and on the cas.
Best Regards, David.

---

They are ignorant to the 100% regarding this topic..I ask you with which software and how you can? work on an alfa 156 1900 jtd 2000.Thanks

I forgot...I have replaced the instrument panel with the other, and I thought I ripoter align the km present in the ecu with the kts, but unfortunately I can not pi? to access the control unit of the instrumentation .Thanks

Quote:

---

Originally Written by tezzero

I forgot...I have replaced the instrument panel with the other, and I thought I ripoter align the km present in the ecu with the kts, but unfortunately I can not pi? to access the control unit of the instrumentation .Thanks

---

let the kts does nothing of this if you've mounted a framework used you want to align the km of the machine to those of the odometer used if I'm not mistaken on this das (in km) are contained in the mcu of the das wants us to be a reader of these mcu

I saw that the kts does not work!!!in fact, st? asking for help regarding the software that does the job and cheap..I don't want to spend 380 euro for the tacho,Thanks

Then you do one thing downloaded nyo4 from the site you are instructions to the das and the bsi and other stuff that you will be? always useful.......

ok many thanks

nyo4 what does it do ? but it also corrects the km on the canvas??

I believe that you can do to pass a panda fire 900 to km0