Printable View
hello all,
do I need to buy a tool for reading from the serial port and also on tour...I need to be able to read and write the ecu that the bdm does not support...
I have read of these interfaces: the cock, fgtech,kess,mpps....qual'? the best?
thank you in advance!
hemce there are a billion of these threads...however it always depends on how much you want to spend and what you face
ilo gallov2 ? a good compromise between price and performance
I will say that I took a FG tech V53 and frankly I was disappointed , maybe it works also well, but from what I'm seeing there are various models and we need to understand which of these ? valid.... * see also the discussion Dehlphi DCM3.7AP
I am considering whether to take a K-Tag
I'm convinced more and more? the winning couple are Kess v2 + KTag IMHO, spend once, and well, at least this ? my thoughts!
your good coupled, spend a little more (not a little) and works well, the only flaw are still the 60 token of kessv2Quote:
Originally Written by V.V.
Well corrado unfortunately ? so if you have a bit of luck and not, we are a little careful with the purchase with the clones not ? the same story of the gold, therefore, versions 48 50 51 52 53 do not really exist, the only thing that ? really viable for example my case, after having spent 250 euro clone there job perfectly without any problems both on tour and in the serial but unfortunately not for all ? cos? indeed, for the most part I see that I spend the money and take only a rip-offQuote:
Originally Written by corrado
Ugoboss what would you understand by token if I know? Why? ? a new word for me..............Quote:
Originally Written by ugoboss
V. V. you're right that spending money on the equipment you work well the best I love.....Only that sometimes even the equipment officers do their errorini therefore ? the whole question mainly to the commitment and determination of those who work, and then as they say "The tools make the master"? I repeat I with my instrument I really can't complain about sar? why? every time I run a job, I always keep the eyes open and fingers crossed?! haahua XD :-)Quote:
Originally Written by V.V.
the tokens are the scriptures that you can perform after which? hangs ... if I'm wrong corregetemi
But if it were so? talking about I think I will clone that I know a friend of mine who bought at the same place that I took my cock v2 has a limit on the kess 2 500 tokens if always corresponds to the limit of scripture and then after the 500 scriptures that you have to send it back to the manufacturer for reprogrammingQuote:
Originally Written by corrado
exact tokens are just what...
after 60 scriptures with the tool you can make the broth..
unless disbursements other beautiful soldini and the update....
the companies that operate in this area treat everyone as of the "cash cows"
then you complain that the plethora of clones....
also I knew of 500 scriptures , wanting to sell the only component riprog without having to re-send it , but I believe that someone this problem ? managed to work around it for? I'm not sure ... let's see what others say ;-)Quote:
Originally Written by infinityecu
thanks guys :) everyone has their own preferences from what I can see...
and another question...what should I use for the iaw 59f ? which programmer? also for these ecu there are hundreds of programmers...
for example, the wing nut or the like are also useful for the iaw?
The cock I can confirm ? excellent for the type of ecu that's interesting to youQuote:
Originally Written by Rebound
It would be helpful if someone knows the way to circumvent the reprogramming perhaps with a particular software and post the guide to make it useful perhaps for those who has already? spent the money or who has the intention of buying a kess v2 cloneQuote:
Originally Written by corrado
here to you an example on the documents section of my cock v2 instructions iaw 59f and on how to run the forumQuote:
Originally Written by Rebound
unfortunately I can not see the attachments.... however I have seen programmers for the iaw 59f that can read / write without making holes on the ecu...
that, among other things ? really risky...
I'm sorry if not posted, but in the documents, there are also the instructions dettagliste on which you can't? mistake to run the hole and place the same afinch? someone would need, maybe I can be utili.................Quote:
Originally Written by Rebound
A good coupled see it with MPPS and Rooster V2. The MPPS the council why? ? very stable, but it only works in serial, while the Rooster V2 I find it great for working in bootmode. With these two tools there is really so much.
About the hole on the IAW59F, if you follow carefully the instructions in the Cock V2, not risk anything.
sorry for the riesumo of the discussion...that story ? this token? the cock has a predetermined number of scriptures?
the cock has absolutely no counter to the scriptures, the token has them the kessv2, but now you baypassano easily by rewriting the frw.
I agree with ugoboss....I would go on kess v2 + k-tag.....nothing to remove the cock....
I have a kessv2 clone with the limit of 50 tokens, in the box there was also the form jlink to re-flash the fw of the processor... honestly, I'm finding it well with the kess, the next time you go shopping will be the self-diagnosis and after ktag... always clone for now, even if the top would be the ktag uff.
Sorry for the question... the mpps com'?? valid, invalid, c'? someone who uses it? thanks
I know that he has some problem on the marelli, fiat, bosch edc16c35, bosh 7.62, it works fine on the Vag group. I have the V12 used for now only on the alpha 147-159 no problem.
Hello, always consider that they are clones and each one has its strengths and weaknesses, both the Kv2 that Fg in need of updates, hw, in the forum you will find many discussions and solutions about, in my opinion the mpps would only spare a few edc15......
The cock she has problems with the edc15?
you antonio ? what is known already? from v48
I did not know it, I was convinced that the boot would without problems.
I with my v48, I never had problems on edc15, it will be luck.
Both boot in serial?Quote:
Originally Written by ugoboss
Hello ? true there are clones and clones, perhaps the first went better then yellow is called v48 but sw is not c? never arrived, the problems of the wrong resistors, capacitors are not suitable to work at 24v, the R is missing, the components are compatible and which are not suitable for it to work in the bdm ? thing that I know tanti..........Quote:
Originally Written by ugoboss
oops typo I meant capacitorsQuote:
Originally Written by passion engines
I have ir? one, the cock v54, kess v2, mpps12, where it goes from one to the other ? I have to say the truth? I am doing good, while working at the bench over the cock I bdm 1255,? the ktag...we always talk about clones...
Max you have a supply amazing xD