fiatecuscan

Printable View

Displays 40 messages of this discussion on a page

18-08-2012, 19:42
iaio92

fiatecuscan

hello all,
19-08-2012, 11:41
giarras

then do so?:
install the drivers of the elm
attack of the elm to the usb
go to control panel, device manager and see the com

hello.
19-08-2012, 11:51
iaio92

ok try now....... :)
20-08-2012, 11:45
giarras

Quote:

Originally Written by iaio92

ok try now....... :)

have you solved it?
20-08-2012, 12:40
cjack

when you turn the key, wait a few moments before clicking on the connect... sometimes to me it fails the first attempt, then I click again and it goes... do some test...
20-08-2012, 13:25
iaio92

I have not had time because of work... tonight maybe if I can I will try..........
20-08-2012, 19:59
iaio92

I tried, I try to connect and it tells me that my elm does not support the can-bus line........ I have to make the change and it works???
20-08-2012, 21:25
giarras

Quote:

Originally Written by iaio92

I tried, I try to connect and it tells me that my elm does not support the can-bus line........ I have to make the change and it works???

aim? there are of elm of very poor quality? that are going crazy in the can, anyway you can? to make the change.
20-08-2012, 21:33
iaio92

how do I do x to make the change that functions in the can???
20-08-2012, 21:59
giarras

Quote:

Originally Written by iaio92

how do I do x to make the change that functions in the can???

here you are served...good job
http://www.professionalchiptuning.ne...=3900#post3900
21-08-2012, 13:13
iaio92

I do not have permission to view the page.. how can I do???
21-08-2012, 13:20
giarras

Quote:

Originally Written by iaio92

I do not have permission to view the page.. how can I do???

to participate in the forum that soon you will be able to download
21-08-2012, 18:43
iaio92

I participate for? I can't even spam to get to 50 posts.....
21-08-2012, 18:56
giarras

you might want to start that, maybe post some files ori so enrich the database I recommend you post in the correct way so? maybe administrators don't go crazy to fix them.
21-08-2012, 22:02
admin

Do as you say giarras I highly recommend you post it in the correct way
-brand
-model
-type ECU
-hp
-displacement
-hw
-sw
All of this semplificher? the research
Of course, try to participate in discussions, and if you can help
where can you
22-08-2012, 12:26
mavaila1972

Quote:

Originally Written by giarras

here you are served...good job
http://www.professionalchiptuning.ne...=3900#post3900

see the instructions usually there and do the editing on the smd resistors on the pcb
22-08-2012, 13:14
iaio92
23-08-2012, 13:22
iaio92

I managed to download the file and watch it.. my model of elm ? different from the one in the picture, in fact quelkla resistance that c'? between the pins 14 and 6 is not c'? I.... how should I do??
23-08-2012, 14:09
zioweb

follow the pin and the card, even if different is what? the resistance-to-remove... of me ? gi? happened and I have done so?...
23-08-2012, 18:00
iaio92

if you post a picture, maybe t? can you tell me what'? .... but if I pull out the resistance then I have to put the two resistors and the capacitors, as in the picture posted???
23-08-2012, 21:29
zioweb

E-mail that we see. I the resistance of the took off and just if no I did the reset deltagliando on the alfa
23-08-2012, 21:32
giarras

Quote:

Originally Written by zioweb

E-mail that we see. I the resistance of the took off and just if no I did the reset deltagliando on the alfa

the resistance was removed to the old 1.2.
23-08-2012, 21:34
giarras

Quote:

Originally Written by iaio92

if you post a picture, maybe t? can you tell me what'? .... but if I pull out the resistance then I have to put the two resistors and the capacitors, as in the picture posted???

but don't vilify! prendini a gi? modified x what it costs, ask in the shop of the forum they will advise you.
14-09-2012, 15:53
bernardo943

Have you installed the drivers ??? I have it set to elm 327 1.4+ and it works fine ;)
14-09-2012, 17:12
bernardo943

Quote:

Originally Written by Bernardo943

Have you installed the drivers ??? I have it set to elm 327 1.4+ and it works fine ;)

elm 327 1.3 excuse :)
05-11-2012, 00:08
afortunao

I can not see the file as I'm sure you collegher? with the password ... But I can say that there are several things that you can do to make it work better ELM327.

And 'to change the resistance of the termination of the line also depends on the type of interface you need to do one or more? amendments.

In addition, it should be noted that the unit? control are connected by means of pins different ? state the interface is configured ? also able to give that to say that the judgment fails to connect.

At the time of the completion of 50 my post in this forum, I put? a list of scholarships and the pin of the communication.
Greetings
05-11-2012, 20:41
msport (exil77grande)

Quote:

Originally Written by afortunao

I can not see the file as I'm sure you collegher? with the password ... But I can say that there are several things that you can do to make it work better ELM327.

And 'to change the resistance of the termination of the line also depends on the type of interface you need to do one or more? amendments.

In addition, it should be noted that the unit? control are connected by means of pins different ? state the interface is configured ? also able to give that to say that the judgment fails to connect.

At the time of the completion of 50 my post in this forum, I put? a list of scholarships and the pin of the communication.
Greetings

the 50 messages are used to download,view, screen, or ask for a pass for the rest you can upload what you want.
26-12-2012, 10:09
checcosassu

I solved it by removing the r04 and r14
14-12-2013, 01:19
dreamc85

the change you can? do as well on the grips bluetooth?
14-12-2013, 14:24
SlimPickens

If ? need to s?. I'm on one of the two that I own, I made it and it worked. Bluetooth/USB ? only the "method" transmission of data, but the circuit in the s? ? that.
14-12-2013, 18:18
dreamc85

I know that you have to remove the resistors could you tell me which? the change allows you to enter in the airbag control unit, abs and power steering?
14-12-2013, 18:26
SlimPickens
14-12-2013, 18:59
dreamc85

therefore, I have only this : link deleted can you tell me something more? about it ? aside from the fact that the v1.5 does not exist and that probably will be? the v1.4 o1.3?

I invite you to read the rules
14-12-2013, 19:08
Peppino91

Quote:

Originally Written by giarras

but don't vilify! prendini a gi? modified x what it costs, ask in the shop of the forum they will advise you.

Sorry if I'm intruding....do you have any contact of someone who sells them already? changed?
14-12-2013, 19:24
dreamc85

I've seen one for sale with the switch, maybe it works, if no s? who could modificartela... I just wanted to find a way not to stay them to edit and so on...
14-12-2013, 19:34
Peppino91
14-12-2013, 19:57
dreamc85

I passeresti the link to see it? thanks!
14-12-2013, 20:03
Peppino91

Quote:

Originally Written by dreamc85

I passeresti the link to see it? thanks!

moderated message

have you read the rules? if you have not done so, I invite you to do so
14-12-2013, 20:59
dreamc85

thanks! however, the eye in the ad says that you need the 3 cables to use it to the full perhaps ? better that t I sent I that has the switch to change the internal contacts...
14-12-2013, 21:07
Peppino91

Quote:

Originally Written by dreamc85

thanks! however, the eye in the ad says that you need the 3 cables to use it to the full perhaps ? better that t I sent I that has the switch to change the internal contacts...

unfortunately for my 500 is not good kkl.... ugh, I could have saved a 15ina euro uff

Displays 40 messages of this discussion on a page