hi could someone take a look if that's okay?
in the event that I should increase the first three curves of the hot start of how many points should I increase are currently in a thousand
Printable View
hi could someone take a look if that's okay?
in the event that I should increase the first three curves of the hot start of how many points should I increase are currently in a thousand
I don't see the file because it is out of the office, but usually for the change there is around you 900-950 points.
I confirm what has been written by ugoboss but the ideal job is to copy the second map (cold start) on the first (hot start) in an overlapping format, in fact, you will see a difference between the two just in the first 3 turns.
no contesting for the links but I would start from 600!!!Quote:
Originally Written by ugoboss
this solution ? was made by carsoft as they say colleagues ? sufficenta say that you have to copy the second map on the first modifcando only 3 curves, try to make the file by hand and you will see that the result ? perfect...
goal of 600 points, I 900 I'm sure that goes in the good bike does not smoke, and I don't have to do it again, the copy and the second map is a good solution and clean.Quote:
Originally Written by carlo abarth
I have done several tests and I have to say that there are virtually no difference with the values that are 700 /800 or 900 the result ? that. go quiet ;-)
there are accrodo instead, the increase in minimum of 900 points, but in some cases you need to alazare more.Quote:
Originally Written by marcogti
agree with msport, on the contrary, I say to you that in order to be sure you look at the measure of the fourth bend of the warm start ( the first three are zero usually) do the same and do not have problems.Quote:
Originally Written by msport (exil77grande)
With the editing you have done that ? the carsoft, the car smokes bad on start-up.
For? for the 1.9 do not agree on the copy of the first curves of the cold start and paste on that hot, given that on the 1.9 the first two corners of the warm start values bassini, around 400 points.
I i 1.9 I do them cos
Sorry, I mean "cold"Quote:
Originally Written by cawadany
I think they all understand ;)Quote:
Originally Written by cawadany
I gi? I've done 2 on the first I come to, 925.. On the second I'm stopping to 910
I did try to copy the cold, and found it hard
maybe you found it hard why? you had the battery on the ground worn out by the continual suffering .
I will say the xo in the meantime now in the cn the same battery nn is struggling the most? obviously cn the change
hi to all
a question....
if I can not download the file, how can I participate in various discussions?
to download you must have the requirements.... laws regulation.......
all that you need to download in order to participate,without having to download anything if you want to give a hand explains how and where to intervene to make that change and so participate,the strangely all those in need of a download after having passed the threshold of 80 messages then do not write more in the presentations section of the ne in a variety of posts to help you as they claim to want to do at the beginning.Quote:
Originally Written by black
Some one that I know completely nothing and wants to learn, must have references ke, is rightly found in the files posted... If nn has them, how can? do speak and give their opinions or to say x as xk and the state cos?? Or that address what is
hello I have tried to change it as you said that? copy the part to the cold to the hot end, but of course, as parameters there are very . in the sense that if you should be around 900 I have to try to raise the curve right?? still under 900 ? true turns on you but nn is still very well why? a friend of mine we have seen with the map made by the one that made l hot start with the program and instead I made by hand was better with the program why? I have to rightly raise the curve
exact you have to raise up to 900 but know better 910/920
thank you the only thing that I can not understand as there are three curves to change the third ? the most high I leave it so com'? or even she to 900 and then after that I pasted the file , I have to raise the curves to? if I raise you up to the first corner together and then I don't know how to do it
You have to copy the map to the cold in that hot.. then you take that hot take the curves ke are under 900 and raise manually up to 910 if you say ke is the third, and above all let it be understood?
the third curve is about 1100 instead, the first two are 400 so I have to raise up to 900 since here we are. the only doubt that I have left to raise the two curves on the 900
I have to select both here in the us are beginning to lift for? if I raise, say, from the attack of the two curves start to bend the curve and I do not know if ? the right thing to do , or do I have to select everything from the beginning of the first curve, but in so doing stretches the first curve in the shape of a mountain I don't know if I explained it well I hope so thank you
You have to select them individually point x point, which program do you use?
Ecm titanium
Xfetto nn have to ke double-click with the right button of the mouse where the value and pi? low of 900 and lift it nn you need to put it in the curve healthy but in small areas
simple, if you posted a file ori with certain numbers hw and sw the recoveries in the web and addresses that are hand written do your tests and even you can post to ask if you're on the right road, so as you can read there is not only download but also upload,as it seems you are one of those that always has to argue,if something is written in the regulation are you ok you are not obliged to follow the forum in the meantime, however, you are writing for 2 days,you're not a professional,I don't think you've posted something to enrich the technical knowledge of this forum but you have given us a ***** to be able to enter in the section off-limits,in the regulation it says the mode that you have to follow to access this section,with this I invite you to take advantage of the serious discussions that you find in this forum that you dreams elsewhere and do less argumentative.Quote:
Originally Written by angelus.d87
Okay you're right you one here x learn and download the files you must do as they all do by sending the post written, Very cool, or compliments, etc as a gi? I have written x ***** x do we say private, but obviously x ***** I will love to answer... and nn I want to add another..