Printable View
Good evening to you all! Regarding the checksum...
When I change a map ori, I'm going to save it, and in the windows of the right in the box, "the original file" and "modified" have the same number, but then if I exit the program, reentry, and I try to charge me two different numbers!!
How it works st? what??
if you use the ecm with the proper driver you should not have to worry about the checksum calculates him......? normal for you to leave different numbers why? all the times that you change something you have to recalculate the checksum, however, has this think about the program
Thank you! But also the example of the attempt of the map that I posted in the other discussion I did with the ecm, but a user told me that the check is not ? correct! I think as I read from the windows..
attention that the sw processing corrects the ck on all files, and in case that should be done by the programmer,with regard to the ck wrong may also depend on the sw cr...... that makes him sick.
I don't have Dawn if the sw is cr... or not honestly...
For this I have no doubt... How do I verify a check that correct??
Many thanks for your help!!
I do not understand what you mean by:
I don't have Dawn if the sw is cr...
That I don't know if the software is demo, crack, or other...
after tell us of that file ori you're talking about, that ecu ? ? edc 15 you have to calculate the checksum, the ecm if you see tells you the family of the checksum with the one in the windows above show that allows you to check to see if ? correct, while if you have a control unit, for example, edc16, the chk is calculated by the programmer, type mpps.
I'm doing tests, such as maps of a bosch m 3.8.3, which of course I can't find in the families of the check..
How do you have already? that said, do ? need to ricalcolarti necessarily the cks: depending on the type of programmer, these ? able diricalcolarlo at the time of the write-in control unit. Once loaded the software, as the last step, f? due cacoli and correzioniin mododachiudere correctly the flash.
Which programmer do you use to read/write to the ecu?
Hello
Marco
Have I understood!
Unfortunately for? I will have to? use a "common" eprom programmer, let's say Willem, so I don't know whether to do this calculation of check! Works in the same way??
not the willem or other dealer does not make the calculation of the checksum , only bdm , galletto 2 and the other is in the boot mode or the obd make the correction of the chk in writing but not on all
if you do not do the calculation of the chk the car does not start , only the iaw of the delta were
the 27c128 to speak , but still I pareggiavo manually
Understood... Then or does the ecm or anything? I don't know if it does or not...
Sorry, but when you buy one of those chips already? ready, to check how can it be corrected?? ? one thing that goes hand in hand with the eprom??
Good day, sorry if riesumo this post, but I just can't do the check properly, my map test, I tried to look for centalina in families checksum, but I can't find it for nothing, somebody, someone can? give me a hand? or a soft working??
maybe if you give info..............???????????????????????????????? ??????????????????????????????????? ? perfectly needless to write, I need a hand if you don't say what
Hello, the problem ? always the one described in the previous post, that is, st? trying to do some testing of the map for a golf4 gti, waiting to make my A3 always motorized AGU.Quote:
Originally Written by faberecu
St? using ecm2001 (found on the net) and some time ago I sent out a test of the map MOD, that seemed to be able to go, but they told me that the checksum was not correct.
Practically from the ecm, in the boxes to the right of the file ori has a number cks, while the mod has a different one.... even if on size gives me the same numbers...
I also tried softwsare type checksum corrector, but the numbers never coincide... ? normal???
email the file
ori and mod
Annex 7225ok
file ori deleted
the primpo ? the ori the second mod, I'd also like to understand the procedure..
look at the number cks ? normal changes between the mod and the ori....*****s, both titanium winols the calculate automatically think that if you use the right driver it also does ecm
understood, but then ? correct the check??
the file ori should be posted in the database if there were no gi?, and in the discussion paste the link with the number of postsQuote:
Originally Written by andreagtr
I'm sorry, I thought being old was already? in the archive...
File ORI
http://www.professionalchiptuning.ne...4354#post84354
Post #22
yes, but you have not typed cv and type of the ecu in the file golds that you've entered in the database, please do soQuote:
Originally Written by andreagtr
even with the ecm will calculate the cks for? you have to follow the one that tells you the program (ecm2001)...I do not think that you need another you just use the right driver, then follow what it tells you........
I put the code in the engine ? unique as a given!
Then you say that ? everything ok? Have you tried to give it an eye??
dispassionately , I do not put this file on the car.... when you lift the pressure the turbo is a must-retarding advance , you are increasing the fill , and then raising the compression ratio real... then do as you believe , you have only greased and relieved the pressure turbo , but you have not moved the limiter ...
the map of a turbo-charged petrol engine ,doesn't it ? easy ? difficult even for experts, then you need the feedback to discharge in real-time , if smagrisci break...
greetings Fabio
here is the file draw
Thank you very much for the information! Of course, I'm here to learn! I'd like to learn how to manage advances, and the limiter honestly not finding it in the driver of the ecm I don't know where to pu? be...
I also have a discussion on the map, would you do me a great pleasure if you could give me a hand! Unfortunately I have no chance? to pay, but if I can in my field, I can certainly reciprocate!!
I learn quickly! I just need a little help...
I have not asked for money, it would not be appropriate for the forum , you have a file service available and are not expensive ,I would recommend it for this to be so , at least learn
I the car petrol turbo to do only with the car on a chassis dynamometer with stekkio
I didn't mean to offend, I recommend, I find it just a return, if proportionate, for what I said that if I were to be asked for cash, to have them I would be also willing to pay! It was a speech hypothetical...Quote:
Originally Written by faberecu
I have the player lambda on the machine, and I don't think I could afford for now even the service file for honest...
In the pi? I'd like to understand the concept of the work to be done, if it is to make attempts at least to know in which direction to move!
Why? now with the pressure at 1 with the "tap" the lambda tells me mixture, but I don't know if why? it burns badly, or why? rule already? a minimum of the advance (as we hear around..)
Thanks for the help you're giving me!
the rules and regulations you have to put the complete data please do so.Quote:
Originally Written by andreagtr
Proceed? immediately, I was taken from the example in the previous postQuote:
Originally Written by leandro89
I tried to fix it...
A question, on titanium, if not I have a family of checksum suitable for a car/ecu where can I take it? You can add??
I honestly think that if you want to do for work ,at least a sw ori wants us to not become crazy .
pu? be that cracked is not done well or the lack of the right drivers as they have already? said or not is up to date.
unfortunately, the initial investments are high, but like all jobs from entrepreneurs have to start with at least the minimum required, or rely on a master such as the site itself .
hello this is only my opinion of course one can do what he wants.
However my ? a question from a hobbyist, and I ask, if c'? the possibility? give reach the checksum is also the original software!!
certain that we want to head , I myself have just started.
the sowftware typically the recalculate alone or with the tool when in the mountains . or sell of sw that they do but also? you need to spend unfortunately.
about titamium the for you to add looking for a map ecu of the same family, and then save it.
...I don't think you understand, I know that they do this automatically, but unfortunately, doing tests, I discovered that I missing a...
Even if you load a map of the same family, how do I load the family up checksum???
this chcksum you have to pareggiarlo hand
16-bit odd / even
and in the end you have the same checksum of the file ori
titanium does not change the checkum because on these old car, or we think the programmer in writing, or do you simply hand
you have the function to tita for the checksum
Thank you!! Only that in my I do not have the family suitable, strange, why? for a AGU but the Audi I combine without issues, at hand, but I find the family correct and it makes me all without problems!!!
about cks, I have read the ecu siemens sid 202 is installed on a ford focus cmax 1800 tdci 115 hp, I tried to check the cks with titanium, I was told by cks wrong, I used a protocol to me corrected, but from the red box that shows cks correct not turned green. question, even if cks was not correct, corrects the kess clone, right?