Deleting the egr and fap on EDC17CP02

Hello all,

Should I delete the egr and fap on a bmw 120, 177cv.
Could someone tell me if the off switch as done in the attached file is fine or there are errors?
Egr deleted with Time.
Fap deleted with Ecusafe.

Thanks

ecusafe delete the fap on edc17? I have my doubts.

For the Fap I used the ecusafe present in the annex.

I did it also with the time but also resets a bit in the pi? and I thought it was pi? correct what was done with ecusafe


deleted attachment and before attaching the sw crack, please contact us

This ? the luca stanca done with the Time.

Thanks for the help

Personally I deleted the DPF on the 120d 177cv with Ecusafe and I have not encountered any particular problems, the management DPF ? been successfully deleted.

the dtc have been deleted, not the management of the dpf....

In practice, what? the difference? Pardon my ignorance.

the drive will continue? to regenerate without that you have faults. then the fap not ? for anything off

The car is pi? regenerations of a life....at least for mine ? was it so?. ? enough to process the file with ecusafe.

I was afraid of just what it says magi1984, the fact that it does not give errors does not mean that the work is done well...

At this point I don't think that even the time to do the switch off correctly saw that only changes a bit.

on the edc17ca14 the dpf is completely turned off with a single bit regenerations including.
03 00 A0 0F 01 00 00 00 00 00 01 00
03 00 A0 0F 01 00 00 00 00 00 00 00 dpf off

on your to disable the dpf you have to find the following string
00 64 00 F4 01 05 00 00 00 01 DPF ON
00 64 00 F4 01 05 00 00 00 00 DPF OFF

The face of those who does not want to share

This ecu ? for? a edc17cp02...are not the same!

in fact, my message ? been edited, the string the lower refers to the cp02

ecusafe is not working ..

voltasensor success...

But with the dfp remover you have tried? I wanted to do with this