Hi to all
and for a While that I read that ? can delete the dtc from the map. I did not understand if ? a software to do it, or you hand. Someone has some clarification, especially for edc 15?
hello
Printable View
Hi to all
and for a While that I read that ? can delete the dtc from the map. I did not understand if ? a software to do it, or you hand. Someone has some clarification, especially for edc 15?
hello
fiat group ?Quote:
Originally Written by Already
Fiat scudo edc15c2
there was a soft dct remover that was on the group edc15c2, however, or you do it with a soft and there are, or do it manually with the damos
sorry I was wrong I wanted to say edc15c7
Hello
Use the lookup function:
http://www.professionalchiptuning.ne...ll=1#post36165
I had read that it only works on edc15c7, or am I wrong?, I do not need for the ecu
Fortunately, use the " search " button ;-)
Hello
Yes, edc15c7, and other ecu, but not edc15c2, do it manually.
to find the error code, I have to read the map in the hex?Quote:
Originally Written by gezame
have you tried with that soft dct remover to find out if you find the pXXXX on your ecuQuote:
Originally Written by Already
HelloQuote:
Originally Written by Already
Yes, in hexadecimal) 16-bit.
But before the code, I can't find the letter P why? in hexadecimal, the P is not c'?. What should I expect?
I also try in asci,but I can't find any info similar to an error.
HelloQuote:
Originally Written by Already
No, you do not find the letter P, only the code.
I tried to search a file of a edc15 a common mistake as the P0400 related to the egr.
If I do a search in the file in hexadecimal bed, 16-bit, I manage to find a multitude? of 0400. As you recognize the error?
They are all put together in the file, or scattered all over the map?
Hello
Under normal circumstances, the dtc are all together, in une zone de map.
Sorry for being insistent, but are days that I go back and forth in the map, but I can not find them.
From what you say, if I try for example the dtc P0400, I Try to hex 0400 and I have to find myself before a 039X or after a 0401 to es ...
look what I found, but I can't follow the logic of the discourse
https://sites.***********/site/vagecu...or-dtc-removal
Discussion ? interesting, I would like to elimitare the error generated by the bad positioning of the swirl in the Audi.
According to me you should look for them in decimal and not hexadecimal, and maybe help you with a damos.
Hi all, I had found a formula and opened a topic but I don't understand how to apply it and if it works,
since you are interested you can take a look
http://www.professionalchiptuning.ne...a-vera-o-falsa
The fact that you should look for in hexadecimal, we all agree!
In memory, according to you, we find them all errors OBD
You are in the hex, but then as you f? find the part from switcciare?
How do you find them. If I use the search function of a dtc any, I find many, the issue and determine whatQuote:
Originally Written by megamind
I was on my ecu I found the area using ecusafe that often you v? remove the dtc in fact.
The curves that are touched if you look at them in 2d have ir? or less the shape that you see to the point 3 of the doc. you posted you in the other page.
Other non-s? I'm also looking for I about info.
hi all I'm looking for a program to delete errors in the control unit (fap/egr...etc)that mmi to allow this without causing any problems and that it has the chance? do almost all of the ecu thanks to all
there are but they are paid
and it's good someone knows someone valid also for a fee