digiprog 3

guys do you know? using that? I have seen it and are interested in taking it...

hi raven I have works really well and is useful if you are interested I'll send you the link where to get it.

yes, thank you, I would be grateful.... ? for a while that I search for it, but it works perfectly? has he ever given you problems? you ? come complete with all the cables over to the obd? manual link etc?

hello raven, it works perfectly, has never given me problems, I figured that is the smart from 2009 onwards, the diagnosis without removing anything. complete with cables and everything took on a chinese site on the 400 euro nn if I remember correctly

What do you mean when you say: "no need to disassemble anything?"
Thanks

usually it is necessary to dismantle the frameworks, tools, and participate in the eeprom... in other cases you can directly from the presadiagnosi

ecu by obd

I could send the link in pm? or qu? if regulation allows...

see if the rules permit towel place here, otherwise I'll send you a private message.

The regulation prohibits the linking to other forums and activities? commercial... but since you're not the seller, I believe that no there is nnt of forbidden.... to avoid mandamelo in the pm... hopefully someone is interested we talk cn the admin and see what can be done... thank you in advance

ok, perfect-you have a private message

C'? the wire with the pliers to the eeprom?

Oh I forgot the manuals with the figures of connection?

si ce all cables caliper manuals.

perfect, I see that you are happy with it, have you used it much?

hello zondra you can give me some news, and more also to me, I bought about 20 days ago, but not yet arrived we hope to arrive.
but I wanted to ask you about the group audi vw how does the audi a4, golf, passat, etc. if you can send me a num. of cell. so I'll call you.thanks

that is beautiful this tool? told :D

fixes the km framework and tools from the control unit... some from other OBD reading the eprom

hello everyone I own, even I, and I'm pretty good
the only problem I know and that ilcolore of cables and different dalcolore shown in the diagrams
the reason why so many cables are useless

someone go has never done in the framework of a multiple?
I have a proble, but of the genre, reading it with the caliper on the guid anon c'? even written that part goes to the caliper, however I read is on one side from the other, but by correcting the km attached to the car, I have always the same ( the ori)
as ever?

if you do not want to do damage I suggest you to unsolder the memory
for the position you need to adhere to the pin 1 of the memory with the pin 1 of the clamp
the caliper is usually marked in red
the memory usually has the dot

I here I don't see no dot?

in the manual I don't see anything about that to speak of the old lancia y from year 1996 to 2000 do you know how to do it?
you can't has to do with the caliper?

if the memory is without dot the pin number 1 is the one in the lower left bearing the inscription that can be read

if you have any doubts download a datashhet

for the framework of the multi-nn can download the image
but you put it to make it clear how the memory?
look, that's the explanation that I gave you should be enough to identify as it is put
but you're desolder?
nn if you desolder try to scrape the pins of the memory, or revives the pond with the welder
I dissalderei to your place

you to make you understand how ? the memory, however today I managed to do it
still I never unsoldered why? I don't know how to do it, I'm afraid to damage.
however, now I have a soldering station hot air and I have to exercise a bit before.
you as dissaldi the momorie?

I also have the hot air station,
usually use a station infrared ( phenomenal)
otherwise, the classic soldering iron with a stylus

and how does it work ?

what do you mean, how does it work?

where are you michael?

can you tell me how is the framework of the lancia y from year 1997 until 2001?
with that plug you connect?

you have given the pdf?

I checked on the y-nn works
does it only on the new,I think
but make sure with the tacho

then you tell me that not c'? to do so with the digiprog

I found on the nyo a collegaemnto that you can do directly from the plug without opening the picture, you say that it is feasible with the plug of the framework of the multiple base?

digi prog nn has a message for you in the paintings programmable, how do you work with?
the connection nyo which indicate the photo refers to the power of the framework, and perhaps to the pin to connect a generator of a wave ( I think at least that it should be so)
maybe some links can help you

Has anyone updated to 4.85? Does it work? I don't have the update file to someone?

yes, I saw that he released an update to the 4.85
I heard a colleague and told me that it's okay
I always have the problem of the cables that are to be modified to have the right color of the pdf
can anyone give me a helping hand?

hi Guys I too have the 4.82 and I agree with some of the machines from the obd but as you linus146 I have the problem of the cables...I am fighting with a sam of the smart 450 2004 cable (51),and someone was able to identify the colors?

identified the connections to sam 450 smart with dp3 clone (different colors from instructions)...some of you managed to connect it to a pc to do the backup file?

then you've solved the problem of the wires?

you Linus146, for now I have solved only with the cable 51 why? I have not had much time to stay behind, but if you can? serve you the step willingly. anyway, I think they used the same "code"colors for other plugs. but it would be better to check it before burning something!

hello, if you give me the steps you do me a great kindness, in fact I also think that they have used the same system for all cables
let's keep updated because it is a sin nn be able to sfrutare 100 x 100 this tool
thanks

ok,in the meantime if you can't discover some other cable, let me know...my plug 51 has the following colors: black, red, light brown, and brown scuro.io I connected the sam so:
instructions / plug 51
green-red
yellow-dark brown
white-light brown
brown-black.
you are able to upgrade to the 4,85?

A greeting to all, I have to say that I found the link to the vs forum after a search is directed towards the digiprog 3, I just bought a new one with 300 euro , the edited version is the 4.85,
for now I've just turned on and I wanted to confront those who pi? practical.

for example, I would like to try on the Nissan juke, 2010 I asked the cable 1, but even I understand what... the mandarin nn I understand ;-)

yesterday I managed successfully by jack odb on vw golf 5 , maybe it was so easy at all :-)