Printable View
good evening everyone I wanted to ask you since I bought mpps v12 to try it out I read a map of a opel zafira 1,9jtd120 cv when I go to select the vehicle nn I from the 8 valves but only 16 v I ch the ecu ? an edc 16 c9 the law but I can write it cm never?
c9 or c39? have you tried to read it with the c39?
yes I tried in both ways the law but nn writes the original file which is his greatness?
the file opel zafira 120 hp ? 2,048 mb
mpps reads the file of 1m only tables.
I don't want to put myself at odds with anyone I just want to say my experiences, I have worked both on the 120 hp and is on the 150 hp and in both cases on the first file to 1mb, and on the second file, 2 mb with mppsv5 I have read and written easily the ecu greetings to all and good job
I confirm thatQuote:
Originally Written by glittering chiffon party dress.fitted
hello I have version 5 but even with that me to write it with the car, have you written it??give me some info in pi? pleaseQuote:
Originally Written by glittering chiffon party dress.fitted
if the sw does not write it means that you do not ? supported not center version 5 and the v12, then alternatively you should always have inside if you want to do this type of work various interfaces es: mmp, galletto bdm. magpro, etc, etc, let us not deceive ourselves with a simple interface, we can do it all.
I cpito but cm never connects c'? has done it? thanksQuote:
Originally Written by alex68
are not all the same, I have also heard to say that some version of these ecu programmed before may of the year following that you can rewrite,
I repeat only heard you say I can't confirm.alternatively e-mail the data of the ecu sw and hdw year etc.
es: last week galletto 2 on the fiat croma 1.9 read ok, write, nothing, tried again with mpps all ok reading ? writing. that's why? I am of the opinion that in a repair shop that works on the ecu, we always want to almost everything. from bdm at mpps from the soldering station to the programmer. etc etc
Read and written as the opel zafira 1.9 16v cdti bosch edc16c39 can as a protocol does not exist in the mpps 8 v file 2 mb
Quote:
Originally Written by alex68
sensa offense, but if you have a programmer-the-counter and a programmer to the obd both officers will not need anything else your speech could go if you are working with the clones.
good evening to all quiu will place the data in the ecu sw:0281012549,hdw:1037a50359 type engine z19dt.....thanks to all of x your resp appearance of new info thank you and welcome you domyQuote:
Originally Written by alex68
yes msport.? anyway, even if you have a mpps official es: you would read a sirius 32 while gallo clone the is x to avoid removing the 29f200 and read it to the programmer.Quote:
Originally Written by msport (exil77grande)
the boys then cm do I write it????tips????? my client wants the job done....
I will not recommend to force since? the risks of nailing the ecu and then I know' cabbage, I repeat mpps ? a very good programmer, but therefore also as says the friend MSPORT, when you are working with clones you have to have almost everything. you have the bdm? in case the resume if something goes wrong. the rest don't you try it with the various protocols that are writing to the edc16c9/39 and good luck.Quote:
Originally Written by domy_pikkio
but the thing which I wonder and why? the colleague with the same version was written ?but the fault ch makes me' he ch when I go to sciverla nn part x of nothingQuote:
Originally Written by alex68
It seems to me that you have answered:Quote:
Originally Written by domy_pikkio
- pu? to change the programmer,almost certainly speaking of clones, and, as you know, often not all are the same
- pu? change the ECU, above a colleague cited models is not writable.
I can tell you that if mpps LAW usually WRITE (or, rather, to the absurd difficulties? more are read often), but if your case does not go ...do not go !