You can? remove the valves swirf from the ecu? With that programmer ? possible?:D
Printable View
You can? remove the valves swirf from the ecu? With that programmer ? possible?:D
obviously, you can?... if you use the search button you will find everything you want.....
Ok, thanks a lot
the starter motor must be connected
as I have explained to my colleagues, you need to read the soft of the ecu with the appropriate tool, mag, mpps gallo2, mod the special map and re-enter, and then you can make the mechanical change, and the tools to operate on the ecu to find them in the store in the forum, as says the friend legendaryslavy the starter motor should be attached if you don't turn on the light.
does anyone know the address of the map to change the edc16c39?
thanks
sorry for the ignorance but what's the pro to delete the swirf ?:confused:
from what I know the swirf serves in the generation of a turbulence that optimizes the mixing of the fuel and the oxidizer, thus allowing a combustion ir? rapid and complete.
therefore, should improve the combustion ,
why? esqluderle then ?:confused:
Ask someone who has had to redo the engine
they break and they end up in the room, the rest you can imagine, are more cons than pros.Quote:
Originally Written by gennantsub
ok if this is a change linked to a discourse of loss prevention goes well
I thought that was a mod to increase the performance of the car
in terms of performance I have seen that does not change anything, I will even on the jtdm the take it off completelyQuote:
Originally Written by gennantsub