Printable View
As the title:
Who and Salerno-Naples and can help me fix my BDM100?
As usual nerd :mad:
I take my BDM that was collecting dust
after purchasing two ECU from the demoman and see a little bit
I feel a rel? take how do I insert the USB...
Damn the parked that worked!!!
I doubt that installing Map3D there was some conflict?
Manaaaaaaaggggiiiiiiiiiiaaaaaa........
The problem often and l?...
Try on another pc
Solved!!! Thanks anyway....
I when I installed it I thought even you have burned an ecu,tried the next day and everything is ok!!
Blessed t?!! I had to reschedule everything..FTDI_AT93C46A & MCU now it's again a beauty....
have you reprogrammed with the two files 1.exe and 2.exe?
Not with these two:
I would have a bdm 100 to reprogram but I do not have the file, and if I'm not mistaken you need a programmer for mcu, right?Quote:
Originally Written by cinqueturbo
no you don't need a programmer for mcu, there are utilities that solve the problem..
would you be so kind to guide me in programming? if it's not ? a problem I bdm 100 I put in the drawer without having ever used ..Quote:
Originally Written by giuseppe1374
hello, I would like to help? unfortunately, as none of the two privileges to upload/download I don't know how to do it maybe someone else can? it will help you
thanks I do understand the problem of the privileges.. if you don't mind me showing the names of the utilities that serve and I to find it..Quote:
Originally Written by giuseppe1374
hello, this ? a screen maybe you can? be useful http://imageshack.us/photo/my-images/543/toolb.jpg/
I found the tool as shown in the picture.. my ftdi and practically virgin which driver to use for the use of the tool ? thanks again really friendlyQuote:
Originally Written by giuseppe1374
I kindly ask you the file ept for bdm 100 can't he find him anywhere, I have the bin file for 93c46 loaded on the eprom programmer, but when I connect the bdm on the usb port is recognized as a serial..
usa mprog3.5 to load the ftdi driver
solved the problem with ftdi programmed 93c46 driver cmd installed correctly, but nothing food with the power supply it turns on the led you hear the ticking of the rel?.. I assume that is to program the motorola.. :(Quote:
Originally Written by giuseppe1374
in the file attached to ept for bdm 100 includes mprog + file atmel 93c46 for writing with controller this is what I did but it still does not work only solved the problem of the driver cmd
sorry, I had attached the archive
if you have found the utility of the screen that I posted, you simply have to first program the driver of the 93c46 (ftdi) and after you start the exe that you update the flash after you install the software again, and put the two files in sistem32
you've done so, but when the food bdm, the led does not turn on.. the utility that I could find, and the version included in the update to version 1255..Quote:
Originally Written by giuseppe1374
send me the bdm that you I can fix it of course I a free:cool:
Quote:
Originally Written by special
yes, but then you have to use all of the version 1255 including the driver and the two files to be put in the system folder, such as c'? written in the guide...
thank you very much for your offer but I don't like people to work and not be paid.. however, if you want I send it to you or if you give me a hand to fix it, you would be grateful I would like to learn something then if I can fix it I have to replace the original one edc16c39 then if you accept the gift willingly.. I'm still looking for the solution to fix the of the bdm fgtech :(Quote:
Originally Written by giuseppe1374
yes, of course I did just that, in fact, the bdm is now recognized correctly, but an error in communication.. if I remember correctly, why? ? from very that ? placed in the drawer before you incasinasse the 93c46 when fed the bdm port with the included power supply is lit, the green led and you could hear the tick of the rel? looking at the diagram I see that ? the motorola that f? excite the rel? so for what I assume that it is to program mc68hc.. I also found the file for the flash of the micro but I don't have the upa for programming..Quote:
Originally Written by sportknight
tell me how I could help you and I do it willingly for me not c? no problem qu? we are all to learn.
when I insert the power supply to the bdm you should turn on the green led and hear the tick of the rel? right?Quote:
Originally Written by giuseppe1374
l power supply is not always you need to insert depends on the ecu to read if you maybe explain to me better what you need to do and the steps you do we can talk
I give you an example.. then if I connect the bdm to the pc and the food bdm with its power supply, the green led should light up right? I have to say that the bdm and as new as he is never connected to any ecu..
surely this bdm you will be? sprogrammato and from my experience I can say that to others ? also happened when not used for a long period of time or for the wrong operation type plug it in when you install the soft, or opening a different version, then the second relay attacks when you take on with the ecu connected.according to me you should me to send it so you shelter I have repaired the dell other to other friends, if not to make you, tell me in short, so I don't think it will handle the spider from the hole
then I confirm that very probably c'? to program the motorola?Quote:
Originally Written by giuseppe1374
I confirm to you that can? be in the micro the problem, but of course I have to have it in my hands to give you the certainty to my advice and fix it and then you can go quiet on the ecu that you need to do
but to program the micro is only by means of the upa? or c'? way through the jtag, I made a jtag cable with the parallel port to accommodate the decoder and modem may be good?Quote:
Originally Written by giuseppe1374
no, the led does not turn on lights when you go to read!!!where are you from???Quote:
Originally Written by special
I have already? the file to program the micro..
I can not say if the cable you have you can you? maybe it is, I use xprog and the upa for the various micro
are rovigo, venetoQuote:
Originally Written by carlo abarth
I thought a lot more down!! if not, you helped me!!Quote:
Originally Written by special
thank you very much dear.. I would like to learn how to flash these microQuote:
Originally Written by carlo abarth
Quote:
Originally Written by giuseppe1374
you don't need any privilege to upload on the forum.
thanks daniel, I found out after, but now I think I've solved the problem:o
I resume this old discussion because? I think I have the same problem.
I can not let go of a BDM100 in any way. Windows sees it as "FTDI <-> Serial converter"
I tried to use MProg, but I can't find the parameters to taste. Could someone send me the file for the EPT?
All the software and executables that should do the upgrade of the firmware does not detect the device and give error "Error opening device."
I've tried both "flash_bdm.exe" that the various executables "1.exe" and "2.exe"
I have a Willem ? need to reprogram the various eprom.
Thanks to anyone give me a tip!!