Printable View
hello to all
I will explain my problem I have a ypsilon 1.3 mjt 90cv, and from the menu ? gone, the voice service where it showed how many miles were left to do the cutting.
? disappeared after a reset of the service, I went to make me clear what is and after some time I realized that there was more?...
how could I do to make a diagnosis diy...
tell me also where I can buy the cable kit to connect the obd port
take advice:Quote:
Originally Written by falchetto88
http://www.professionalchiptuning.ne...-Diagnosi-Auto
something like *********** would be no good... I didn't want to spend all that money
the edf must be good for you to check once entered in the service section if the number of coupons ? was brought to "9"
But how many miles has the car?
the edf is fine but you need a elm 327, at least, that you can find in the online shop.Quote:
Originally Written by falchetto88
the car has 114000 miles on the coupon did it about 2000 miles ago... now I find in the online shop elm327... I would also Multiecuscan I saw that on the site c'? pity that I still can't download
I confirm with elm327 + multiecuscan enters the Dashboard you'll find them all!!
buy elm327 possibly with three adapters download fiat ecu scan and you are affixed!!! you can do more than I have less what you want...
thanks to all for the info...in a week I should try to make the diagnosis... you do? to know how it will go
if you have read the rules knows that we do not tolerate this type of question, then the invitation to be toned down or are forced to bannarla.Quote:
Originally Written by matteodl76
I confirm, as it is recommended that you reset the counter by cutting a number > 0
I would also advise the purchase of multiecuscan, for a figure really ridiculous considering the potential? of the instrument.
with *********** you do it quietly to me ? success the same thing
I also had a ypsilon and after the cutting and clearing was gone, the voice service I solved with multiecuscan and a elm 327