Programmer Upa

Hello guys.. those of you who often use this programmer ??
I need help.. I have 2 but none work for me.. ( 1 original and a clone )
I look forward to the info..

thanks

azz... nobody uses this programmer?

look, if ec l you have the original a friend of mine had stopped working contatando erlasoft they sent a little program that you restored , did you contacted???

Hello
Upa original elrasoft, works 100%, used many times in the years 2006 onwards.

you can be + clear , what you need to know what are the errors of your upa

also I use it works,what are the tests that you did?cables,power supply,db,are affixed??

Hello Audi sp,
that problem right do you have with the programmer?

I also use a UPA, without problems.

the simple test that I have done recently ? to read an eprom 93c66 or 24c04.. not c? was to read it tomorrow.. if I can do a screen and I'll post it..
even I have all the kit in the original schedule, but nothing..

I use without problems... when you open the program that the upa is recognized the hw? in the above program, in the item "tools"c'? a function "hardware test"if I'm not mistaken, launching this function, you should do a sort is diagnosis in the programmer to locate internal faults(segiu the instructions during the test).
one last thing, once I was freaking out suddenly did not want to work... in the end the probblema was the usb cable(even though it works),you must use propiro the one provided.

I also use the upa clone never had any problems, I obd75 check that you have listed hello.

guys ,did you know that the.upa can also be used as an oscilloscope?

Quote:

---

Originally Written by tore65

guys ,did you know that the.upa can also be used as an oscilloscope?

---

I know that when you are new in a forum before you read the rules and then we are presented with in the appropriate section.

Guys I was thinking of buying a programmer upa usb version 1.2.. what do you think?

Good buy hello

While the Model XPROG-M V5.0 ? The better the UPA?

Quote:

---

Originally Written by audi sp

the simple test that I have done recently ? to read an eprom 93c66 or 24c04.. not c? was to read it tomorrow.. if I can do a screen and I'll post it..
even I have all the kit in the original schedule, but nothing..

---

to resolved in the end?

I use it often and I find it very good I also xprog but and a slaughterhouse...the council on upa!!

Quote:

---

Originally Written by carbo92

Guys I was thinking of buying a programmer upa usb version 1.2.. what do you think?

---

but with xprog certain micro them read with Upa read them but they break....
the problems of reading with the upa data 100% from the socket if not ? weld-on or if it has ever worked ? damaged
I have read and written about everything , just to add the Piasini are not able to read properly write the 25p32v6g if I remember well , but did not ? in the list
I have had a few of the scripts for the upa , they are really cute, by reading directly the pin code

script upa examples

Quote:

---

Originally Written by faberecu

but with xprog certain micro them read with Upa read them but they break....
the problems of reading with the upa data 100% from the socket if not ? weld-on or if it has ever worked ? damaged
I have read and written about everything , just to add the Piasini are not able to read properly write the 25p32v6g if I remember well , but did not ? in the list
I have had a few of the scripts for the upa , they are really cute, by reading directly the pin code

script upa examples

---

Sorry but what are these scripts ?
how to use?

decompatta and put them on the scripts folder dell upa and toggle the tools menu, it seems to me
once you have read the memory utilizzaondo the script that appears in the middle of the various types of chips you get the pin code
clearly each script works for families
? cute

Quote:

---

Originally Written by faberecu

decompatta and put them on the scripts folder dell upa and toggle the tools menu, it seems to me
once you have read the memory utilizzaondo the script that appears in the middle of the various types of chips you get the pin code
clearly each script works for families
? cute

---

but there are different kinds of scripts?
Thanks for the info, are the first steps with the UPApa:p

script,pin code?
sorry, we speak of the pin code by reading the micro inside elle immobox?
or you mean the security byte of some motorola?

no, they are scripts that are created by third parties for the immediate reading of pin code is a body or bsi or ecu
reading the memory or the micro
there are several scripts for different brands , or immobox are also full of photos
speed up the work
nothing earth-shattering, but comfortable

a sort of improvement ...

I introduce myself on the discussion because it can be useful to colleagues and I confirm that to me as well, and happened to have problems on the programmer, upa official and have been followed in an exemplary way by the upa ( elrasoft) that have guided me to resolve the problem.
even if I prefer xprog

but where can you find these scripts?
you give me a tip?
I'd be really interested...

I was thinking of tiling a UPA to my GQ-4X

a strange curiosity?: I just bought a caliper ?m to read the SOIC8 without desoldering, but now I have doubts on the actual reliability? this programming system.

It is reliable?
It is more reliable with a UPA compared with the GQ?

thanks

for reading, you always have to unsolder
otherwise, how do you correct a reading done wrong?

in fact, it was my doubt!

but since I see that these calipers little ones around, I have the imnpressione that many use them without even unsolder....

it always depends on what you need to do,
second, what do you do if a reading is made badly, you notice it immediately
according to what you do instead, you notice it after that maybe the machine nn more
they are certainly comfortable, but you must always be ready and equipped to unsolder

Quote:

---

Originally Written by cinqueturbo

but there are different kinds of scripts?
Thanks for the info, are the first steps with the UPApa:p

---

Hello
Yes, they are different, some for inmo, the other for the pin, the other for miles, etc.

Quote:

---

Originally Written by linus146

for reading, you always have to unsolder
otherwise, how do you correct a reading done wrong?

---

Hello
No, no you have to unsolder, some eeprom you can llere with the caliper, and the other not.
You will only need to asicurartti here the reading is good.

Here, then, such as the eeprom are read with the caliper?

I simply try to read most times and see if the check ? and always the same. But this does not protect you from being able to corrupt the data, but...

Quote:

---

Originally Written by gezame

Hello
Yes, they are different, some for inmo, the other for the pin, the other for miles, etc.

---

gezame, but where to find them?

you better get to unsolder always, read with the caliper of the chip soldered on the board many times ? busted.

I see so
at least at the beginning you make of the readings is with the caliper that can be seen
then when you're reading done well by a hurt, you can also read directly only with the caliper
p.s. to me pocp time ago and asked for a reading that seemed to be well made, but it has left a string, all ff ff ff ff ff
and was that where there was code key

on purpose to avoid problems of the kind I prefer to unsolder always.

in fact,................

trust is equal to rub--------

c'? a guide (or manual ) of this upa on how to connect the calipers to read or even to unsolder and which player esare ?

you how to install the program there is the guide