who can give me a hand??

Hello guys..I open this topic to ask you for information,help and your experience on the ecu mikuni-made by kokusan which mounts on one of my many bikes and the cio? a husqvarna SM610 2005 carburetor...
the problem,if so? you can? call,? that this bike ? gi? been much modified by me with several jobs, including a kit plus the HTM racing carburetor mikuni fcr from 41mm air filter and airbox moddati,full exhaust arrow titanium,final reports reviewed,etc,etc... and of course a ecu magazine from the same HTM racing Milan with rev limiter moved from 7500 rpm gold medals at the current 8100rpm....now since the bike c'? l? stops for bad weather, and again, I have a p? more I of time ****** I wanted to dedicate myself to the mapping of this ecu maybe further shifting the rpm limiter to 8500 rpm, and reviewed a p? the curve of the ignition advance in the prediction of the mixture, p?? push that can give me a little more? especially at the top also seen that monter? the cams of a husky te610 which should give me more shooting at the range...opening the ecu,expecting to find a micro more "human" I came across this is the result:


I was hoping to find the eeprom to desolder and read, but the bad news ? the processor ? a H8/3687 of which s? nothing, and therefore I believe that ? impossible to read with a simple eprom programmer!
who gives me some advice about it....
aahh..the bike ? this....

here ? immortalized in a step of the base...now the bike ? completely different.....

even if it does not turn more practically for the public roads...every time I shake a p? the buildings of my country....

hello munro,go to the website of renesas that some of the information you find them.

renesas eh....ok..thanks a lot giarras....

have you seen piasini if you ? useful to something?

I believe that the micro of this ecu wants a dedicated programmer.....unfortunately I don't have....I do not think that the piasini the face..but controllero ... have you ever seen that you can do something.....
thanks.

Munro if you need the piasini can I lending...

many thanks mirks for your helpfulness? but I think that logistically it is impossible to do such a thing.......
I st? in prov Foggia.....you in Turin.......I don't think is feasible for the loan......

If you need to you I send it quiet

I thank you infinitely, mirks....
but the fact ? that I believe that the piasini not the face....
I think that requires a programatore renesas......
then I s? that are forced to go to in HTM....

I checked.... the piasini in the list has nothing to husqvarna!!!

in fact, rego...
we want to force a programatore renesas...
the scab, the most coarse to? ? you must unsolder the micro first.....
and in view of the small size and I think they want the equipment of the smurfs.....
maybe for you? htm have another system but I don't think that give me explanations.....

the only explanation that will give you sar?.... send us your ecu, we will!! pull out the cash and go!!! no one has the gall v53 x control??? also the piasini ? jtag and program processors renesas.... but I agree with this!!!

munro, are with the netbook 10 inch, and I do not see nearly a ciufolo from the photo.... there are pitches x the jtag on the ecu???

near the micro seems there are two areas that might be of pitches...
but I'm not sicuro.....perch?????

xk? according to me ? impossible that c'? x force from unsolder the micro... I believe that you just need to find the tool just to read it and piazziole right.... to me it reads and writes with some special equipment.... on the website renesas that you have found?? you are informed if the new gallo v53 doing something???

With the piasini sec me the law since the law with the yamaha r6 that mounts renesas as soon as I can I look at it, if he even ktm

on the website renesas I found the pc interface>micro....
then you can? place on the"interface socket-programmer" the only micro....
*mirks of that R6 are we talking about???the carburetors??if mounting a ecu mikuni-made by kokusan with micro renesas H8 and you can? read in jtag me saving 200 cards, reprogramming and shipping the ecu in HTM....
let me know please...

yamaha R6 up to 2005, you can read and write, from 2006 onwards, you can only write