Hi to all, I would like an opinion on this map, just prepared..I am open to all suggestions and criticism! Thanks in advance
Printable View
Hi to all, I would like an opinion on this map, just prepared..I am open to all suggestions and criticism! Thanks in advance
Excuse me, you could move the discussion in the area Files motor vehicle ecu diesel given the passage to the average user? Thanks
I'm sorry, but not center if you're the average user,that category only serves to distinguish those who are here just to those who are here from more time and has privileges to see attachments,screen and ask for the pass and then, according to me, here is the section for the discussion.
anyway, in the map you have just changed, 2 maps including the injection that is not good and a map called torque limiter # 2 that can go for the rest you have to do everything again.
On my titanium the map of the turbine is not c'? and the map torque limiter 2 and the torque limiter #3 that makes me change, are blocked. The injection map that I touched on what's wrong? Right x understand what I'm doing wrong...
hello abberello the map that you are locked out are similar maps?
loa map turbo don't see it as that car has the turbine adjustment mechanical, not electronic.
I honestly do not understood this of the locked maps.
hello msport I have figured out that the table does not evidensiano.
I figured that it knows how to edit him.Quote:
Originally Written by marco
I have no way to view the map? I can say that for a good map,and this applies to all types of ecu,the fuel demand and the limitations to this must be in line...what? for fuel I am referring to the maps pedal..or Driver wish that in the marelli mj6 as well as in many other request ? in Nm torque...
Holy words
On titanium 1.61 when I open the map torque limiter 2 on one axis there are the turns while on the other c'? the load. If I try to select only one parameter when I click on the value, nothing happens, not even highlights. What happens on the other maps...otherwise how would I change the values for the injection and the other the map of the limiter?
parts from the mod in 2d..but for? initially you should moddare lim torque N?1...
in all the car has 9 lim torque....
7 are all as the N?2 while the other 2 are a function of the temp of the engine and another in the function of the temp diesel...
then there are the maps lambda 2....you are interested in moddare that for high iq......
try this:http://img23.imageshack.us/img23/829...oppiamj6n1.png
Uploaded with ImageShack.us
then these:http://img685.imageshack.us/img685/2...ppiamj6n23.png
Uploaded with ImageShack.us
and finally these:http://img832.imageshack.us/img832/7...iamj6n4567.png
Uploaded with ImageShack.us
Munro, but this above screenshot you posted, how do I have it on the ECM?
C'? something does not add up, I have currently only a file of a 90 hp, but aside from Injection choked, and 3 torque limiters, I can not find the other.
Thanks...
you have to scroll through the file in 2d ... the cio? in mode? graphics in 2 sizes..if you do have the driver of the ecm can only do the "mappette" to 3 kilos a pound....
Perfect Munro. Unfortunately for? that ? the work that they do many of the "pseudomappatori" of which I do not trust you, why am pushed to learn...
That said, scrolling through, I have already? tried it, but how do I recognize one thing from another? I maybe the one ? date, from the drivers of the ECM, and I delete a priori control on those addresses. The rest of it?
I have the values in the Y-axis, to make everything more? clear?
sets the size the more you agradano in 2d using the buttons 256x1 and the boxes size reading over the words "uses info driver" and scroll down the file until you see the curves that look similar to the pictures posted..then I start to moddare...
Thanks a lot Munro!
I want to reiterate that I like the spirit of the group which always helps! As soon as I finish studying, I am at work.......!
I hope I have made a small improvement...
hello I would like to help you and see some your files but I do not have the permissions....who knows? if someone helps me in this.
however, I'll give you some tips. on this engine maps as a function of fuel temp are not active, and lambda even, you need to increase the injection p.to to your liking where do you want more? increase eye but if too much smoke...and especially after you understand how you read that map.
Map 1 nn touching it is not needed
limiter tiles 1 are 2 maps and ? driver wish
instead ? important on these engines the lim couple#2
lim torque#3 do not touch it serves no purpose.
find the other limiters by scrolling the map in 2d sn all neighbors except the first, and incremental with knowledge of the increases of fuel injection from the
hey munro, nice document! where have you found?Quote:
Originally Written by munro
true very interesting to this document ;)
Here are the changes to the parameters kindly segnalatomi by Munro... what do you think?
These are all limiters right? now I should go to the map the pedal and injection?
what criteria moddi the lim torque if not before, moddi the map pedal??
it seems to be a map or lambda limiter fumes...
I would like to gfuardare this map to give my own opinion? I joined yesterday and I do not open the file ori and mod, however, on these machines you tap the place, and the limiters torque, and without looking at the file I think the turbine ? mechanical
May I know on this map which are the addresses of the egr valve? where it begins and where it ends. Thanks
Abberello is the switch off of the egr ? a bit change..
if you give me the rpm for ***** the map, I can tell you the address...
067C4A this and address
but the rail and in 8bit?
But the limiter turns and a bit on this map?
That ecm calls injection choked on 69, ? the rail pressure.
It is in 16-bit, and ? was told nll'the other discussion that has offset -100. Immediately after, you will find its limiter in the f temp, fuel, what ? the typical ladder.
but, and the injection home that is located on the address 67....? xk I've seen that the maximum and, in fact, 1420 can be?