Printable View
what would be the bdm?Quote:
Originally Written by demolitionMan
it may be that replaced the ecu for some reason
checcosassu the bdm ? a type of programmer that connects dorettamente on the pcb of the ecu and allows you to do a complete reading of the flasks e2p and mpc
the bdm ? a complete reading of all idati present in the ecu....if, for example, you overwrite a file in the bdm of another car with less miles on your ecu, this stores all the data in the new file...
how many miles you have driven since you bought??
I bought that marked 120.700 miles and it now has 131.000 kmQuote:
Originally Written by tezzero
I'll tell you one thing.. the multiecuscan.. ? the free ( no license fee ) ??
anyway I suggest you to check the same data with another diagnosis, i.e. to understand if multiecuscan says the truth
anyway if you find the miles different between the ecu and engine instrument panel...wants to say and made some programming I replace the ecu, not c'? a shadow of a doubt!!
? registered...for? it tells me 0 programming
if it is written in the bdm reset the counterQuote:
Originally Written by checcosassu
a replacement ecu ? can?
if you change the data of the eeprom dissaldandola or by using the bdm you will not see anything..Quote:
Originally Written by checcosassu
otherwise, if when you remap a or do an upgrade in fiat (leaves traces programming the flash or m58 with a progrmmatore to the serial port as mpps; wing nut; mag).
Quiet me ? happened to me on a car with proprerio "unipropetario" the car is the following I think is a small error in reading.
Hello
Quote:
Originally Written by alberto.bf
uses another diagnosis..but I think that it is climbing ! take the ecu and see if ? was open!
the diagnosis of other cars says the km right with a small tolerance of error
well 3-4 % of tolerance ? a problem..Quote:
Originally Written by checcosassu
also I have noticed such a difference on some machines
I tried fiatecu scan on different cars:
alfa 147 2004 jtd km framework 113456km, fiat ecu scan 143798km
fiat grande punto 1.6 mjet..framework 81000, fiat ecu scan 79867 km
fiat punto 1.2 8v framework 107678km *********** 106548km
fiat punto 1.2 8v framework 123564km fiat ecuscan 136728km
in principle, we
ps all of the cars in question were mapped to the 2 point, the big point and the 147, except for the 147 was the n entry. of programming, in the 147 does not check the item no.reprogramming..sar? that is not supported or the other
for me c'? a difference of 100,000 miles, something is wrong
Where are a few km ? the ecu no? not the speedometer.....I wouldn't worry about it, I think that for some reason has been replaced the ecu.....
check with another diagnosis ..in the event you find the same kmtraggio think that l have scalta by virgin ecu .. or if more lucky to have made an update ..but I would opt for the first one!!
ok controller? with another diagnosis
if ? made in the bdm does not increase the progressive schedules
to me I do not know why? I mark 1000km in less...and ? was only read in bdm, in that my sister bought new marks 200000km and in reality? it has 135000
as you sice my sar? the soft a little fagghio (not good)
diagnosis the official texa 50.0(b)...
Well, but if the ECU has less on the odometer, that problem c'?? I think this is the case...