hi should I replace the instrument panel of an audi a 4 as the title there are some precautions to take??I use the vas
Printable View
hi should I replace the instrument panel of an audi a 4 as the title there are some precautions to take??I use the vas
I know that in the car on the inside of the framework, and c'? also the immo... I would like to see if it has an eeprom on the inside and the sposterei...so be quiet
The framework also includes l-immo
I opened the picture to see if c'? l eprom but there are too many, and don't recognize
Look it up on ? a 8 pin signed or 93c something 24c something or 65c something...
Not 65 I wanted to say 95 :-)
I found and una24c04 but ? cryptata
Well you are not interested to read it if the pictures are the same just swap the eeprom...
exact!!!!!!!!!!!!!!!!!Quote:
Originally Written by angel
according to you just reverse it ?? try to reverse it.... and see what happens! I advise you to salvartela...
You alter the contents of the Eprom...and therefore the machine will not run on the pi?.Quote:
Originally Written by cicciocar
hello, if you need to replace the instrument panel, the first thing to do ? put it in the new mode, and then align it with the vcds. in 10 min you do everything.
finally someone who s? something>!Quote:
Originally Written by scarface
as it turned out the replacement operation of the framework?
the manner in which you have worked?
in fact, they were two operations that are valid............at least I think
hello sorry if I'm intruding, how do you put it in the new mode ?
you should not have the login
just a cable kkl and as a software vag eprom programmer
at the end I l I replaced it.I have read the contents of the eprom and with the appropriate software, I have fixed the picture.Quote:
Originally Written by linus146
in a few words, you will lose the contents of the eprom and the picture goes crazy.
with the software vag commander please log in to your old tacho and write in the new after which? go to mod the km all by obd