clone edc17 you can?

Guys I have a meriva 2012 in a workshop with ecu bosch edc17 which ? been mapped by me with a cock the clone.
I write the map all ok read and written without prb.
the customer is happy with the car .
the following day, I kiama that the car nn +.
why ?
no connection with the diagniosi.
try again in bootmode no contact with the ecu error boot.
why?
then start to take info about it.
I feel that the clone nn you can? do if nn with a new processor written on the bench.
then kiedo if you know how to do x to resume it.
or other solutions.


aspect of your news...........

That I know,
Currently something makes' the magpro official.
They are a sponsor here on the forum, then ask them

bad story,then you have a backup right?

you got it all

I think it is for? that cloning is a different story.
From that s? I, at present on the edc17 reads everything except the area codes.
This is why, good or bad ? difficult to do damage

ask bogdans, magicmotorsport, in palermo, I believe he can help you...

bogdans?
do you have a cell number?

I, for one? I don't understand.... if the machine ? left in the bike, how ? can that part the most so out of the blue? I want to understand when responding to a wrong writing, but if the car ? match the scripture ? all went well.
someone has an explanation about this?

Quote:

---

Originally Written by matd82

bogdans?
do you have a cell number?

---

http://www.professionalchiptuning.ne...agicmotorsport



091 7487722

Quote:

---

Originally Written by giarras

http://www.professionalchiptuning.ne...agicmotorsport



091 7487722

---

this I found; I think he had a cell.......
grz anyway
in the morning the same.......

also, for me, the work of mapping has nothing to do, otherwise it would be blocked immediately.

as I have told you ? the antituning.
x? the cock nn corrects well the cksum here is the xch?.
now they are out of new protocols that eliminate this prb

if the cks not ? correct well the car is not starting from the very first start, I have tested it on a edc15, let alone in the edc17

nn always
it may happen that v? in motion and then nn +.
the address that you have tested on the eedc15 nn means anything about..
this having codes, otp, and the frame number in the processor pu? happen that part and when you realize that nn ? correct the file v? in the block.
or the rooster in writing has deteriorated something and how ? warmed up the ecu ? over burn-in.
and nn +.
in boot mode, I would have had to write to the file ori instead I can + connect.
so I think you both detereriorato the processor.
now I'm informing you where and how to take these processors, you can rewrite to tour with the programmer.
equipment station infrared programmer to tour x tricore processors and a buuon contact x processors virgins.
a lot of patience and precision(these I miss yesterday I wanted to throw down? the cock and give fire to the ecu).
moral of the story x restore everything I have or riscriver the micro on a virgin since I have backup.
or new ecu at the dealer $ 1000 for the ecu + 300€ configuration
or mount another ecu with body kiave and immo.
hopefully I find it.

listen to matd82, I still am not convinced of the thing! if the writing was not correct in the boot definitely would have taken to putting the case that the ecu realizes that the code frame is not equal!
for the fact that the cock you burned the processor I think not, otherwise I had not even written!
I don't know I don't know..... but something else c'

Try to write it with gallo gold!!!

I have to find someone from my part of the usa, the cock ori.
nn I know but I'm looking for way over the phone.

Quote:

---

Originally Written by James

listen to matd82, I still am not convinced of the thing! if the writing was not correct in the boot definitely would have taken to putting the case that the ecu realizes that the code frame is not equal!
for the fact that the cock you burned the processor I think not, otherwise I had not even written!
I don't know I don't know..... but something else c'?!

---

in fact, the cock nn he burned but deteriorated then when I put in the bike ? heated and ? fo..ttuta of the whole.
anyway, even if I have to buy it new so I'll try more possible causes....
use it as a guinea pig.
maybe the connect mpps ? works with the protocol of the 126 abarth.
(sorry for the crap, but I have to play down)

Quote:

---

Originally Written by matd82

this I found; I think he had a cell.......
grz anyway
in the morning the same.......

---

tell them that call on the part of the professionalchiptuning.

Quote:

---

Originally Written by msport (exil77grande)

tell them that call on the part of the professionalchiptuning.

---

certainly in the morning the kiamo and I feel that I says.

anyway, from what I've read and heard around me say that it is almost impossible to clone it.
but to find a ecu the same in demolition kit immo and pawl pu? work.

if instead I find a in demolition, so I can write with cock ori xch? the file ori I read it before they merged.

even if I write another outlet in demolition, you do not write the data of the key.
Have you heard Magicmotorsport?

If nn writes the data to the otp are collapsed,

Someone nearby that has the cock ori?
Or other instrumentation?

has reason coma..nn write the data of the key. see what they tell you in Magicmotorsport at least make an attempt. otherwise, let's see who has a cock ori x give you a hand. oh I forgot, have you spoken with our administrators? maybe some x board?

azzmi diapice a lot of x what happened!! then the guilt and attribuilre the rooster clone?

The guilt and my I knew that there are protocols up to date, but I checked.

That mange! What are you experiencing ? the situation that pi? it terrifies me: that's why? I have so much stressed with the Duchy...
I am very sorry! I hope you will be able to resolve quickly with the least effort and expense.

unfortunately, you have to consider that sometimes it's not going straight.
M? ? happened a few times, and s? what does it say!!!
According to m?, entrusted to Magicmotorsport that you can save time and money.

Quote:

---

Originally Written by bart

That mange! What are you experiencing ? the situation that pi? it terrifies me: that's why? I have so much stressed with the Duchy...
I am very sorry! I hope you will be able to resolve quickly with the least effort and expense.

---

the thing is very different because the duchy and' edc16 and put in motion with the file the motion to say while this is a edc17.

matthew let me understand, but st? the control unit as lai read written in serial or in bdm with the rooster clone??
I ask because if I can have my say..I have never heard of the ecu whatever they may be that you can burn to a reprogramming...
especially because you talk about the ecu that heats or burns out??but are you sure that the block of the ecu to be due from you???
not ? that in some way have sovvracaricato the ecu?? that's? with a booster, or maybe with a bridge cables, perhaps inadvertently reversing the polarit??
I'll give you all the st? questions why? ? something veeery strange...never heard that one before...if it was a problem of cks or antituning the car you do not hop on the bike even if you abbracciavi with the lady...but just finished reprogramming...

Quote:

---

Originally Written by munro

matthew let me understand, but st? the control unit as lai read written in serial or in bdm with the rooster clone??
I ask because if I can have my say..I have never heard of the ecu whatever they may be that you can burn to a reprogramming...
especially because you talk about the ecu that heats or burns out??but are you sure that the block of the ecu to be due from you???
not ? that in some way have sovvracaricato the ecu?? that's? with a booster, or maybe with a bridge cables, perhaps inadvertently reversing the polarit??
I'll give you all the st? questions why? ? something veeery strange...never heard that one before...if it was a problem of cks or antituning the car you do not hop on the bike even if you abbracciavi with the lady...but just finished reprogramming...

---

also, according to me, and just what you say..if there was a write error or cks wrong with the car not started already from the first boot...
I remain of the idea I that the problem was not the riprogramazione.

guys I am informed by experts in the field edc17.
the only thing to do ? try conn x17 and see s ela resumed in the boot.
the discorsso of the cksum ? a prb of the cock.
? already happened to a different thing but none ? humble by spubblicarlo unlike my.
anyway, Monday I boot with the x17 ori.
and we see
.

I have the kiama bogdans but the secretary told me that he was busy and I would rikiamato (I'm still waiting for).
I hope for the best.......
the speech of the departures trust that ? as I say the antituning f? sti skerzi.

[QUOTE=matd82;19533]guys I am informed by experts in the field edc17.
the only thing to do ? try conn x17 and see s ela resumed in the boot.
the discorsso of the cksum ? a prb of the cock.
? already happened to a different thing but none ? humble by spubblicarlo unlike my.
anyway, Monday I boot with the x17 ori.
and we see


hello matd82 I have the f.g. golds I am near salerno if you can affect .anyway, from my documents, I can confirm that the antituning or password if the centraliane it ? features,you had to give already error download the connection in the boot already read ,and then sn agree with all of that to me ? happened to me in a ecu that the car wrong the cks is not the first boot....................................

I heard through the grapevine that some of the ecu to the thirtieth time nn start + sar? true, anyway I do? a walk in terrasini, who is from palermo, 20 km to the headquarters of the magicmotosport I want to understand if ? true.

giarras according to you, what can? to be successful with this edc17????after mapped the car is all right and dil day after so point blank, the ecu stops??

Quote:

---

Originally Written by munro

giarras according to you, what can? to be successful with this edc17????after mapped the car is all right and dil day after so point blank, the ecu stops??

---

honestly, I think it's little it can be proved that,if they had to give problems gave them now and not the day after,I not I would have taken this responsibility.

according to me ? in the opening pu? something happen,type the welds of the microprocessor and with the temperature changes the day after ? game,hain tried to cool it or heat it?

definitely a problem cecksum of the clone, if you need I have the originae and I'm in taranto up to 28!!!!!!!!!!!!!!!

Today I try with kess ori bdm and see ..
Thanks x for the offers of help. ......