Hi everyone, angel and deal with the electronics on the car after several years of mechanical and eletrauto I went back to doing what I had started so many years ago , luckily things have changed for the better .
Printable View
Hi everyone, angel and deal with the electronics on the car after several years of mechanical and eletrauto I went back to doing what I had started so many years ago , luckily things have changed for the better .
Hello and welcome to angel
Hi angel and welcome,I see you're in rome, do We know how old are you?
welcome.
welcome to the board.
hello angel...could you tell,please,why do you things have changed for the better?
Welcome to-----------------
welcome!!!!!
I'm 34, and I 13 I was in the middle of the carQuote:
Originally Written by msport (exil77grande)
Has the ecu to read through them we want the emulator to be welded on the eprom after made in emulation, you had to unsolder the his and put a new one until you found the right combination x get 12% in all
hello and welcome
sorry but the emulator was not a device that is interfaced with the type of your eprom is inserted in the socket eprom of your electronic control unit ( which you above call "emulator") it was also in real time to change the mapping, and once defined it in a new eprom and insert it into the ecu? as it is now via the serial....
Hello, welcome!!!! :D
hello and welcome
will call again for the 3rd and last time and then take measures,the discussion goes back to 1 1/2 ago and you not only do you not care to see the dates, but even where I am speaking saying that it is a discussion as old as if nothing was the answer for number.Quote:
Originally Written by lombian
Read above!! in this way you risk the banQuote:
Originally Written by Ibiza08