Diagnosis BMW Carsoft....

Hi to all this ? my first official post, I'm here to ask for an opinion:
Having had need of a tester a bit specific for my BMW**** you ? fact advice from a "friend" the Carsoft...I don't know if anyone knows, ? a tester that makes BMW, Mercedes and Mini, really? I find it very slow and often does not find the control units and the assistance ? completely absent, in short, for BMW ? better the DIS virtual machine..for mercedes a little better there are also some wiring diagrams and doing some coding.
However, would you be able to recommend a tester for BMW that face encoding and programming?
If anyone has, like me, the Carsoft and ? riscito to use it l better if you have some tips ? welcome.
Thanks a lot

I would recommend the Bavarian Tecnich if it were not necessary to the proprietary interface; for generic interfaces as I consider the ELM327 I appended to your request!

The best part ? the Bavarian Tecnich costs about as much as the Carsoft, but it seems like the best...however it seems to me that it is not yet covered in the new BMW 3 series type F01 F02..
Thanks anyway for the info

When you have the interface ? only a matter of time, I'm a bit lentucci with the release of updates, but the Software to me ? seemed to be simple and intuitive, as well as? very complete; from what I have seen for?, ? unusable with interfaces that are different from those BT! Tried INPA Ediabas? Not ? not at all intuitive, but in the VM you can accoppiarci the DIS; it offers the chance? to encode and make a diagnosis, but even here you do not have coverage for some of the BMW pi? recent and you need more? interfaces for cover, both the "old", that those pi? fresh; to me, I tried, having a E81 N47D20A with EDC17CP03 the wiring to the OBD-to-USB K+DCan. You can find the Kit on eBay for a few euros, and come complete with installation CD, everything, only not ? agile configuration for proper operation.

I hope I was helpful ^_^!

Yes I have INPA ediabas in virtual machine...almost everything...some players remain out of the new...that leaves me puzzled ? with Carsoft (the original software)that has a proprietary interface with a lot of cables for old bmw, interface the HW, the HW key is the face of BMW for the pi? the same things that I do with a cable from 40 euro on ebay..:)
Vabe thanks 1000 will be released? of studying each other on

guys , I have a cable ediabas, I can not use it,
I need to only display errors and real-time data from the sensors, I have to use inpa or dis?? I don't understand
the dis then use it with vmware right ? I can start it but no I understand how to use it

g

I use it a lot...anyway I am attaching the kit to l?installation I you can see a little cpme start etc.. For the diagnoosi use DIS

For win 32 bit

thanks milllee ... then the dis you use ok... inpa, what is it?

thanks milllee ... then the dis you use ok... inpa, what is it?
it is against the rules to ask fi get send via ***** the personal attachments of the forum otherwise the regulation would be the best so far (msport (exil77grande)

I have both inpa ediabas dis progman, but no I can get them to start can someone help me. Thanks in advance.

I have the cable k+dcan am unable to make the diagnosis, but I cannot start the programming with the sss in the virtual machine,while the same procedure by placing it on a 32-bit computer windows 7 I can not get it to work, it gives an error 200,159.
I also have carsoft bmw ? the work for an accurate and speedy diagnosis.but not like dis that has the control plans.
on the dis if someone wants advice, I can help you while on the installation, not so much.
and I can also give some hands on sss in the original programming.

Quote:

---

Originally Written by the dark service

I have both inpa ediabas dis progman, but no I can get them to start can someone help me. Thanks in advance.

---

start before the virtual machine ,then the simulator of the diagnosis is started, the dis arrivals to the main page you shrink it with ctrl alt and run on the simulator.
inpa works?if that doesn't work, you have to configure the com port to 1, and latency, as well as on 1.reboot your computer and test.

It's all ok! I was wrong on the settings of the virtual machine. However, on the dis and progman, I have a lot of experience if anyone needs please do not hesitate are at your complete disposal. Good fun

which settings did you wrong?you have experience on the use or on the installation.I need some straight sullinstallazione

I should set a better virtual machine but not like you do

I tried again at a distance of time on another computer and everything works.
my big problem is I have to program a e60 and tells me that he wants the opps to program while I like the simulator, I the ops does not have the optical fiber.

I have to encode a control unit ekp on a bmw e60 2005, how can I do?

Usa on the e60 you can safely use the winkpf