hi to all I would like to ask if someone ? happened not to be able to read the ecu on a c4 picasso cmp6 1.6 hdi 110 cv fap with mmps v5 in fact, I don't do the ecu id, and the software tells me the volts are 12.5 v but it indicates that the ecu is not ? found are desperate someone can? give me info, thanks.
of that year and the car
sorry I forgot to write it down year: October 2007
mpps v5 if I'm not mistaken the door edc16c34 k-line can-line
citroen c4 picasso 1.6 hdi 110cv unit should be edc16 c34 and mpps latest version 5
every time that I do the ecu id answer me the ecu is not found
but it surely doesn't see it why? your mpps does not support the can line on that protocol , the flaw in the bdm and via!!!!!!!!!!!
it is the driver that is used in mpps v5 ? the k line
then by your assumption I would say that mpps v5 does c4 picasso 1.6 hdi year 2007 why ? on the can line
therefore, only the bdm ?
It is exact not the can bus to the ecu
there are no special precautions to be able to read this ecu ?
If you only have one tool bdm
or different instruments.Quote:
Originally Written by andrew64
I would not open the ecu, but to tour with mpps can you read ? the pinout of the edc16c34 provides the k-line ?which pin ?
to tour this unit can be done ? you lose the encoding injectors ? and with the bdm 1255 cl....I can do it or are there more problems?
Quote:
Originally Written by andrew64
in bdm, you can do it easily.
ok thanks to all
question: if you preventivamnete a full read bdm and then you try and say obd with fgtech, and you lose the encoding ineittori, rewriting everything up, and take the right coding injectors ?
Exact enough, rewrite e2p bdm
If you follow the instructions of the fgtech, you should not miss coding
I the. I followed but the car would not start... luck X scricendo the ori is game... Given what I do I read the full bdm, and then to the maximum I try obd that if something happens that makes me lose the encoding injectors, rewrite the eprom and the. I want to resume, without the use of lexia... The important thing is that you continue the encoding from bdm