Hi to all. I would like to know which software generic (also not free) I could use with the interface ELM 327 to make the diagnosis? From experience, what would you recommend for me? thanks
Printable View
Hi to all. I would like to know which software generic (also not free) I could use with the interface ELM 327 to make the diagnosis? From experience, what would you recommend for me? thanks
you can try those free possibly, too, there are those payment.
in the annex to all the links of the creators.
Giarras I thank you, but I can not access the file that you attached, how do I do that?
Regulation...50 posts useful!
If you have a cell with Android and the ELM 327 bluetooth, I suggest the Torque Pro (costs very little for the service ke is €3,55 - if cerki good in the network, you'll find him anke free) and allows you to make a beautiful p? of things, in addition to the classic diagnosis fault codes and reset.
This programme ? also in Italian? Works with the elm327 no bluetooth via the usb port? thanksQuote:
Originally Written by Nightwing
The Torque Pro ? also in English, in? communicates kn the ELM 327 only in bluetooth and I don't think is expected that the funzionabento kn usb, since k is a program made for smartphones, tablets, and everything ke runs under Android.
If you do a Youtube search on Torque Pro, you will find a beautiful p? video and get an idea of what it does ;)
Thanks Nightwing, very nice.
hello, I'm sorry I downloaded the file for fiat ecu scan but I miss the pss do you know how I can or who can I contact to get it?
I'm sorry, but I advise you to go in the section presentations, and do so in a comprehensive manner, and to read the rules and everything will be more clear,it's not cute to enter someone else's house without knocking and ask for without even show up.Quote:
Originally Written by Luigi
I take advantage of this thread to have a board that pertain to a software, free or paid, that will allow me to do the Log accurate diagnosis with particular attention to the recent BMW (2000 > ...). What do you recommend? That n? think of the Bavarian Technic? Has anybody ever tried it with ELM 327?
I can open a poll of the type "Vs favorite Software with ELM327"? I'd like to know the choices of the users, and the reasons for it.
P.s.
Where can I find the Link to download the Scan Tool? From what I understand ? a Freeware program.
I have scan tool 1.13, mi ? out with the cd of the elm327 bluetooth..
I miss you never tried, me if you are interested you step.. :)
I've yet to find a valid software that makes you an accurate diagnosis and that it is generic.. I have done a thousand trials, but in the end I always use the brain & b workshop..
also torque, it runs on a p? all of the machines, but sometimes by strange errors, or does not detect them.. example 156 jtd not starting for sensor burned, did not give me anything.. diagnosed with the brain & b, I found the error..
Perfect, I set aside the idea of using the ELM in a pi? consistent!
Thank you all for the answers :)!
I use multiecuscan and that's fine
I use *********** on the vehicles of the group, alfa, fiat and lancia as soft generic instead of his or pcmscan or scan elm...touch scan, scantool, odb2 etc etc and in the end almost all the same...
If you just want to play on the Fiat goes well ***********..if you want something more? species on the German you have to go to autocom..
perhaps you can hear the pope..but unfortunately you ? resigned ;)
I advise you to go in the presentation section, instead of intervening in a discussion unnecessarily and come to come to you to complain of in the pm because you can't download.Quote:
Originally Written by racanacci
on the German cars to be able to make a diagnosis, such as fiat ecu scan, you'll have to equip OP COM at least for my opel 2007 with the soft generic I always see those 4 values in the end did not say to me, gran ch
hi I have the elm 327 usb with the program multiecuscan registered only that I can only connect to the engine control unit, the other units says connection failed...the file, and cracked and modified for lancia ypsilon 2007...who owns the software for this diagnostic cable ...can give me some alternatives ..thanks
Good morning, the elm327 does not allow reading/writing of the maps? ? only a diagnostic cable, turning off lights, etc..?
Exact, with the elm, you can only make a diagnosis!Quote:
Originally Written by SanJoe
You can elencarmi all "the things that you can do" with the elm327?
only diagnosis
Excuse me if I open a discussion a bit of a walk, but I wanted to ask if multiecuscan is a sw that has a valid license for a car brand, or once purchased is good for the fiat group?
I ask this because by reading what he has written matteodl76 it seems that it should be made specifically for your brand of car affected.
Thanks.
hi! multiecuscan is good for the fiat group, which also includes a few car suzuki!!!
Very nice, thanks. But just the module elm 327 to have full access to the diagnostics, or need to integrate with something?Quote:
Originally Written by racanacci
depends on where you want to diagnose that there are adapters,Quote:
Originally Written by X4N
Hello Leo, I'm sorry, but what do you mean by "where"? The attack on the obd is not the only one? That is, the one next to the fuse box on the inside? In my case I'm talking about a 147 of 2009.Quote:
Originally Written by leo_sg
for elm there are 4 types of adapters that are used at the request of the software on the basis of what you need to take in the diagnosis, ecu engine, airbag, abs, body computer, from 2000 onwards, all the connections are obd located in different points of the car, but in your case directly in the body computerQuote:
Originally Written by X4N
Mainly I would be interested to see the engine parameters, and if possible compare them with reference data of the mother house. Kindly could you tell me the type of adapter? Thanks.Quote:
Originally Written by passion engines
look in the network adapters - cables for elm 327Quote:
Originally Written by X4N
always consider that the elm327 is a tool for beginners see also the fraction of the cost.... if you want to have a good diagnosis you need to entrust to other hardware capable of reading most protocols.... ;)
In fact, yesterday evening, looking for these adapters for the elm, I noticed that the one with the "green wire" , were differentiated as well hehe, is that specific to the ecu of the engine. With results like that it offers the network I arrived at the kess v2, but from what I understand it was a clone of the original price is much higher, but muuuuuch more... and you say it is ok to begin to understand something of chiptuning? Thanks.
hello racanacci, prementto who are not expert in chiptuning..what are you going to read multiple protocols? do you mean that it's not okay for all the manufacturers, or that the same car can't do everything that you could via OBD?Quote:
always consider that the elm327 is a tool for beginners see also the fraction of the cost.... if you want to have a good diagnosis you need to entrust to other hardware capable of reading most protocols....
I hope I explained well...
someone can tell me a APP for a fee (the most complete) for iphone for these strumentini?
I bought a v-gate, which should be equal to ELM.327
Repeat.......elm is a programming interface for hw match to the sw type MES (if you have a car, the fiat group is enough) to make only diagnosis, then cleared errors in memory see paramemetri in real-time, etc, etc, Instead of interfaces, type Kess or fgtech need in order to read and write lQuote:
Originally Written by X4N
and the maps in the ecu to work only with their dedicated sw.
Ok, thanks for the clarification...I thought that, for example, kess, could do the diagnosis etc in addition to the reading/writing of the ecu.Quote:
Originally Written by Errecinque
You know, the ESM is reliable? that is, the values read are real or unpacked?
Thanks.