should I write a 500 abarth with mpps 12, recommendations?
I can not read it right? I have read that I can read in boot mode, someone explain to me how?
do I have to do ecuid me the gold, and then how do I adapt it to write it with mpps?
Printable View
should I write a 500 abarth with mpps 12, recommendations?
I can not read it right? I have read that I can read in boot mode, someone explain to me how?
do I have to do ecuid me the gold, and then how do I adapt it to write it with mpps?
hello do ecu data mail hw and sw and try to find your file, so you avoid doing the reading in boot.il file, you can write without the need for adaptations and various things
gi? done thanks all the same.
then written successfully with mpps v12?Quote:
Originally Written by andreap
yes, for? I have not read...
but my! you have had liver ..I personally would not have risked it,thanks x the information might prove handy to users who do not have equipment of course ****llo.
I giarras I would never have risked with mpps to write it,how many scriptures have you done?
2, I risked only why? I had to hand the kess, but just now by your comments, I'm realizing how much I riskedQuote:
Originally Written by msport (exil77grande)
why? is the risk ? I with MPPS clone V5 I have written it 4 or 5 times after you found the file ori in the network. I don't think I have heard of problems in scripture with the clones on this ECU
c'? a lot of people that he has planted
for charity? we believe, for? according to me it takes care of everything. For example, if while writing you accidentally touch the lever of the headlights you can create problems, why? those about 8 amps in absorption do to lower the voltage even slightly, or if you also lower the glass.. As I write, I remove all and leave the pc resting on the seat without even touching it until the end of the writing, and when I can ( if I'm not outside), I connect the power supply in parallel to the battery. Another thing, according to me, important ? do not leave objects in the electronic type phones that are close to the programmer, this is why? interference may occur.
I know that mpps on me7.9.10 has planted a few days ago just a friend ? the success that has called me and I advised her to put it in the boot, and a problem of interface that goes not so much agree
? almost a terror, the write lock and also when I write fingers crossed!
surely it will be? a good clone qst point
Guys the 7.9.10 the you can lock all the times that you want to pi after boot with two resistors of 100 ohms the write back with a gold ulsiasi downloaded over the network I have written with any interface, and I have blocked several times because of the cks but always shoot are simple ecu bosch (eat everything).
Hello lancia delta evo, could you please explain the specific procedure to put them in the boot? :)Quote:
Originally Written by lancia delta evo
Thanks! :)
Thanks 1000 FidodidoTuning: very nice! :)
clearly with gallo v2Quote:
Originally Written by FidodidoTuning
I have mpps v12 and when I go to read the me7.9.10 (I have a alfa mito ) does not give me the command that is available, just write!
You can only write with the MPPS. is a file ori on the forum and make the changes you want. then you can write it with the MPPSQuote:
Originally Written by albertorapper
the exact mpps can only write you must have a file ori need to do the mod then you put it in, but you have good probabilities? planting the ecu then you need the rooster v2 in the boot.........
this is precisely, I would like to avoid planting the ecu!
with the gallo v2 can then be read in the boot and then write without problems right?
another thing, having bought the version v13 I must get there it was written that they had improved the compatibility? with certain units, including well as this, what do you say hope for the best or ? a hoax?
I think that is a buffalo...there are v13, which in practice are v12..Quote:
Originally Written by albertorapper
sorry, but these are in the bdm?
you are the one that I received ? a v12 disguised v13... on the program you can? see the hardware version
but in the boot you can? read?
I made two with the cock without the slightest problem
the question is:Quote:
Originally Written by Friar
IN THE BOOT, CAN IT BE DONE?
I'm talking about with mpps,s? that's? pu? write with a p? of care,but can you? read in boot mode?
you write with mpps, but it takes a lot of courage!!!
ok....but the law in the boot?
it reads in the boot and the board also writing in the boot block these ecu via write serial( personal experience)Quote:
Originally Written by claudio-abarth
as you f? to connect the mpps in the boot on these ecu's??
Should not be a possible operation; according to my research, you can do the write-only in serial with MPPS v12, but without reading it.
With mpps you can also read...
Of course, the procedure of the boot.
With a good tool there are no problems to write it by obd.
moderated message
The eye appears in your reading of the cock, and Virtual not there I try to write with mpps if you are looking for on the forum c ? the procedure for cutting files, I recommend you read in boot and write in the boot, in the documents Dell fg c ? the skema boot
I confirm that I have pain if it crashes,read in boot go on the safe side!!Quote:
Originally Written by legendaryslave
eeee, magar fuss to cushi, you have to copy all of the processor in the boot and change the numbers soft in the e2pQuote:
Originally Written by unlocker1984
for the other question, use the search button
http://www.professionalchiptuning.ne...=tagliare+file