MD d6f3 Opinion Map

Hi guys I wanted an opinion on my map gpunto 75cv the car is fine but you can do more maybe you tell me what you can do again and where I'm wrong maybe

How do I upload files?

you have to go in advanced mode, but I do not know if with your few messages you can post, I think so, try.

You have to Ziparlo within

I think I still can't Post files that's why nothing appears to me..let's get to the point..the car is fine I made a 15 ina of maps...the only problem I find and that in full acceleration in 3A starting from the 1500giri with diagnosis attached gives me the maximum power at 2500 rpm with 830mg of air intake,1.5 bar turbo,1200bar about rail, 59mm3 diesel iniettato..ma then everything starts to go down except the rail that goes up to 1500bar, I am at 4000 rpm with 500mg of air about 1.2 bar turbo is 32mm3 diesel..I don't understand why..maybe I should increase injection times enough.?

In Advanced Mode you have to select attachments and upload the compressed files to W.
about the drop there are limiters of diesel fuel-temperature etc. etc.
if I don't see the file even knowing the softare

Attachments option also opening the Advanced Mode...the fuel limiters are all flat at 70mg even those temperature that reach 90 degrees diesel and 140 degrees engine...I can't even load the screen.. will it be for the few messages?

http://www.professionalchiptuning.ne...manager& values[t]=11068 & amp; contenttpe peid=1 & amp; poststarttime=1641722787&po sthash=161fe8e8015d83de4859625e63ba96c0 & amp; insertinli ne=1

Follow this link..
once attached the file unfortunately you have to click on the message in the Red Bottom and move it and press put online

The link does not work but there must be attachments and in the form of a clasp symbol..
Flat at 70mg ??? and since when to give diesel in the Marelli you have to pave something??
I do not remember exactly but I made one with 69mg 3.2 Bar of pressure injectors and pump from 190mg anyway smoked from fear

ignazio, you do not have permission to access this page. This can? be due to one of the following reasons:

Your user account may not have sufficient privileges to access this page. You're trying to change the message to someone else, access administrative features or some other proprietary system?
If you are trying to write a message, the administrator may have disabled your account or it may be waiting for activation

Here's what appears..