Printable View
Hi to all,I did make this map where it was done luca stanca the egr off and increase performance
the problem is this last point,the performance increased just a little,I wanted to ask if someone could take a look and tell me(with winols where can I find the curves on the times of injections and limiters and turbo pressure)
I attach the files:
The ECU should be a EDC16 c39 but the file ORI does not seem to me like the original so I can not see how actually the mod differs from the original. Try to provide HW and SW in the ECU. From what I've seen, the mod is not bad. But I repeat, I do not understand what has been incrementeto. The limiters torque, rail, and turbo could go well. The injection time if you don't know how to move and if the map is not too push them toccherei. BUT.... we hear someone more brave!!
The ecu is a edc17c49
Use winols to see the differences?
You can use WinOls more professional or ECM Titanium or any editor. Loads of first GOLD, then mod, and, once opened, can see the differences.
For me, that I am novice to recognize the curves is not easy,it takes me a long time without damos or driver for winols.
But now I see to find something in the network
the ecu and a edc17c49, and was removed the Torque Monitoring maximum torque , and a modified pedal - turbo - an overboost - pressure naphtha - limiters press. nafta - and torque limiters - removed egr and fap, it seems strange to me that the change feels very little, in any case, you can ask whoever you made for clarification.
ugoboss but with that program you see these changes?
I use winols, but without the damos how do you recognize the map?
acknowledge to the eye, after years of changes, let's say that at least the maps main you are well :-)
To recognize eye I could take as a starting point this guide?
To send more fuel which maps should I retouch?
the guidance for an ecu vag (and an audi) you have to hands a ecu fiat group, even though all 2 edc17 are very different, and especially are different on some of the logic of functioning, that said, I say to you that to send more diesel ppotresti intervene on the injection time or pressure naphtha, but the wrong edit maps so ridiculous, to make a change we must start from the request, i.e. from the pedal, then you go ahead and you modda all you need but always according to the request of the pedal, so if you want to make a good change in the care of a expert, you can also feel the online service of this site, or someone else, and remember that to do damage to do tests in a moment.
I would like to learn something by myself(for hobby),the car drives well up to 3000rpm then from there up is missing a bit of power,what do you say if you increase the map the pedal and then?to want to follow me?
Thanks������
if you want to post some map I can give you my humble opinion, I'm nobody so don't take it for cautious about what I say, unfortunately I have little time, as you can see, I connect once a day and not even always, of course, without commitment, and if they want to with the help of other users.
So let's see if I can find the map on a pedal, and increasing a bit from 2500rpm and up.
I have just a little of the time I do the change and see
Thanks Ugo;-)
From the map, pedal pedal do little, if I remember correctly, are limited to high rpm by the torque limiter
Then increase the pedal and torque limiters then we will see
Then,the first step who helps me recognize the map the pedal?
If you upload the file that I posted at the beginning with winols you will find the address 2D3DC2 eight maps that seem to me maps the pedal but I'm not sure why they arrive at 10000rpm hdds,according to you, what are they?
who has modified it has only incremented the last 4 why?
you know, those are the maps the pedal, why have changed only 4 you should ask whoever made the map, it is necessary to say also that sometimes they are not all active maps, where you see which arrives at 10000 rpm.
and if you increase the other?
why are there so many?
I always increase all, some can be disabled, or be used in the various functions of dna
Then I increased the maps pedal of a 12% addition to the increase that had already been given by those who had done before the change
if I did everything ok now on that map step?
I am attaching the file
the file that I uploaded is not with the changes
I had some problems to save with winols
I enclose the one where I increased the map pedal
this file is 4 Mb and I can't help you
Simply open with winols, where is it that you cannot?
with the changes that already had on the pedal and you got a 30% which is not little, in any case, now that adjusts the torque limiters, and then steps to the injection, advances, etc., etc.: -)
Is ugo,I want to make a map "aggressive" now to adapt the torque limiters
I have just a little of the time(because now sn is a little messed up...) place the file
As much as I can I push to increase the fuel injection and advances?
Thanks Ugoboss!
good evening, I wanted to ask if you could direct me with an address, map or image with a torque monitoring of the file ori of the giulietta
could you indicate which of these changes in the mod file affect the torque monitorin? thanks
could someone tell me the torque monitoring for this edc17 c49 in 2d? thanks.. waiting for
Are the maps in the negative
281A22
281DB2
and not only that... but the major ones are..
uncool map miss some limiter