hi all, as from object I need the code of this radio. thanks in advance.
CONTINENTAL A2C9081210200013241
FIAT 940 VP2 UNECE
THANKS IN ADVANCE.
Printable View
hi all, as from object I need the code of this radio. thanks in advance.
CONTINENTAL A2C9081210200013241
FIAT 940 VP2 UNECE
THANKS IN ADVANCE.
Hello lightning I imagine that you have not car-prog.
Unmount the e2p and read the contents with a programmator-the-counter.
Should not be encrypted.
If you have a car prog, which always programmtore speaks 8.21 should give you a hand.
Hi mustang I have nothing of this equipment the mentioned.
Hello, can anyone give me a hand? Thanks
Quote:
Originally Written by lightning
Hello lightning I the only way I can help you, and read the e2p with my programmer.
And to do that I have to have the radio in the laboratory.
Thanks for helping me to offered.I solved discovery in the Alpha.
For the prox time I propose you 2 solutions.Quote:
Originally Written by lightning
1. Carprog, 9.21 for a few coins then turns into 8.21 online.
2. The Willem is 40 including adapters sop.
With one used properly will do this and more.
You have to practice welding with hot air or you can take a pair of tweezers, but do not always go well often give problems contacts, and if you don't know what you're reading, and in that way risky and also applies to the carptog
MustangGt, but once you've read e2p with which software you can find the codes? Or you do it manually?
If we talk about carprog the same has its software.Quote:
Originally Written by giuseppe89
If we are talking about is Willem in his hex editor.
For the,the majority of the cases are written in the clear.
In some cases, as happened with mercedes or some of the psas are encrypted.
Hello mustang ,since I don't even know how it's done the e2p, kindly put a few photos of the e2p and program so or an idea of what I to explained and if you can show me how to use the program.? Thanks
The second and more Difficult I should write a guide.Quote:
Originally Written by lightning
for the first request, you can always learn.
I made half the engine of my alfa alone without no one helped me I don't see why not you can start from some foundation.
http://www.auto-consulting****/DWN/...dustria l e lectronics.pdf
This guide, very well done my helps you to understand how it works eeprom and flash.
I do these things to 20yo for me to do a flash player, the pc or the ecu doesn't change anything.
The guide also talks about how you process seriously on the engine, not the c....you often write.
And a bit dated but the principles are those and valid.
To me helped a lot to understand the maps.
Hello mustang, the link does not open
test from my driveQuote:
Originally Written by lightning
https://drive.***********/file/d/0B2...ew?usp=sharing
I'm a forum and configured with the walk!
levers the asterisks and add "drive. com"