Printable View
Hi guys as the title I'll post my map if someone can give it a look and give me some advice I would be grateful.
what I would like to resolve if possible the classical vacuum of these 1.3, and then the fact that 5th gear is fixed on the 4000 rpm and not move.
thanks
Some ideas?
Cinqueturbo only you can help me ������������
Thank you Savior, but unfortunately I do not still download and then I your pardon....Ugh!
Quote:
Originally Written by simonemora
Here there is little to study .hahaha I also I advice
The only one that is helping me most of all is to cinqueturbo. However, the poverello, we are ill-treated and sooner or later we will be sending to that country ah, ah
According to me the most before and after, hahah, anyway, if I'm not mistaken of cinqueturbo I had read on a discussion that ****llo of 1.3 is very goodQuote:
Originally Written by simonemora
Guys some info for this Ecu?
Hello Savior, I'm going alone....I seem to be all too buttoned even they were state secrets....
Hello Simon , all of them are a little as well but not because they want to do the mysterious, but rather because there are hours and oral study past behind .. floor plan with small tips, you will see that the things you say indirectly..go quietQuote:
Originally Written by simonemora
You're too optimistic, I don't think so. I was an expert, I will help the other more explicitly, and not with the crumbs.... Everyone does as he wants, but I would be less jealous of the know. I can understand between professionals, but a beginner doing it for the studio doing tests on his car that discomfort would give.....mah!!!
Simone c is our passion a job.! You'll see that floor plan with your strengths and with a little help you will learn.. today in the afternoon, in my small way do a look at the map of the 90 hpQuote:
Originally Written by simonemora
Watch the latest with 29, loaded yesterday, I'm trying and I have to say that I like it!
To improve, but first impressions are positive!!!
(to give you some straight concrete there is better, indeed....all too jealous of what they think they know....)
winols is online anywhere.. the damos for marelli as well. where is that block?Quote:
Originally Written by salvatoreragonese
If c is something to not get the wall up in the first post c is written my request! If you can give us a look I would be gratefulQuote:
Originally Written by lsdlsd88
begins to post up the logs with Multi ecu scan, and see how much IQ have and how little I assume that is injecting at a high rpm, then you will see that understand which maps limit you.
Quote:
Originally Written by lsdlsd88
With the dephi is there in parameters in real-time?
I think yes, but do the log becomes an idiot.
get a elm327 that costs a foolishness and use MES.
Where would then be the problem if you do not inject the required?Quote:
Originally Written by lsdlsd88
Ok I agree! And don't let it drop?
If the torque limiters and iq, you have unlocked all you need to increase the request.pedal in.the range of laps in which to cala. Remember that the curves of the pedal in 2d should be read to the contraryQuote:
Originally Written by salvatoreragonese
hello errecinque. I'll tell you the truth I think I have them unlocked if you get the chance can you give us a look? about the pedal, and then did so, and that is bad for you?Quote:
Originally Written by Errecinque
But this map lai proven?Quote:
Originally Written by salvatoreragonese
that defect notice?
what would you improve?
smokes too much?
let me understand better..
when you have a doubt on the performance of the maps, why not do the simple tests and you remove the doubt?
then the map goes pretty well. what I would like to get from this machine is more power from 1900 rpm 2700/2800 with all the gears and I don't want 5th gear to stop at 4000 rpm. the problem of the low rpm seems to resolve slightly going to mod 1d5084 and set it to 12800, but as soon as this is done the machine begins to smoke and consume a bang.you can do anything?Quote:
Originally Written by cinqueturbo
Use Winols?Quote:
Originally Written by salvatoreragonese
begins to give a look..
No use of ecm. Just return looked at thanksQuote:
Originally Written by cinqueturbo
Bad.. I hope you have at least on the pc, otherwise I have only lost time..Quote:
Originally Written by salvatoreragonese
five but and a few damons?Quote:
Originally Written by cinqueturbo
Quote:
Originally Written by cinqueturbo
Five, I can confirm that I have winols.what should we do
I saw that in the attached file from cinqueturbo there is a file of 2mb that you need to open with winols as you do with the ecm. Then import the file .Kp that is a mappack and you will find a map described as if it were a driver in the ecmQuote:
Originally Written by salvatoreragonese
you have to give me the courtesy of drag on Winols files in this sequence..Quote:
Originally Written by salvatoreragonese
1° PUNTOEVOSALVO A13_ACE5 .ORI
2° my current
3° WinOLS (Fiat Grande Punto (Importierted Version)).kp
and watch carefully I think you will understand where you have gone wrong and where you can improve..
I thank you but winols does not L I never opened so I don't know where to put hands. I try tomorrow thanks
And then? want to map this car, and you want to pull in behind before a software?Quote:
Originally Written by salvatoreragonese
Then yesterday I opened the program with the map but I'll tell you the truth, I read the addresses, and I gave in meal to the ecm I found some interesting thing, as soon as I place some of the addresses. And think it through on if you likeQuote:
Originally Written by cinqueturbo
Ok.. but you see that the ECM fires ca..ate..Quote:
Originally Written by salvatoreragonese
Addresses taken from winols or says it values high?
addresses the software has nothing to doQuote:
Originally Written by salvatoreragonese
You ECM from values? :P hahaha
you have the conversions at least?
I only know the conversions of rail and turboQuote:
Originally Written by cinqueturbo
hi five, thanks to the file posted I think I have found the time of an overboost at the address 1D86AC 1D895A such addresses are to be incremented?.Quote:
Originally Written by cinqueturbo
through that file I found the other bit that after I will post oper discuss buonaserata guys