Printable View
Hi, I have effected the reading of the car in 39 minutes in kline with the kessv2, modified the file and tried to write me msg "security code wrong". question : you have to force it in the bdm? I tried to read even with magpro, but not to write, it's worth a try to write by obd with the mag?
Hello Radd7 I on my delta after having made a backup in bdm write it in the obd in 49 seconds with the rooster... I have the kess or other programmers, but I don't think you should have no problems.Waiting for some other response, and if you can always do a full backup bdm,at least works quiet by obd
Post what you downloaded from the car with kess and what you're writing that it's definitely something wrong.. this car I assume the mountains edc16c39 then it is not possible for the kess fail ammeno that you do not have other issues outside of the file.
E-mail and give us more info and let's solve
here is the rar file
I try to read and write with the cock, v50 or v54. what do you think?
the file posted is GOLD perfectly rewritable.. test with v54, of course..
see that you have to write it in the can line that is wired in kline, at least I've always done so with the kess v2
when I read, I made it in kline, can not me made her do, now I can't remember if the kess v2 when I'm going to write makes me choose can or kline... that is not the inchiodo?
The kess asks is it in kline or can, just before the screen with the id read / write, etc.. if you read in kline I recommend you to write it in kline. Honestly I have never tried to make one in the can that I had read in kline or the reverse so I could not tell you with certainty.Quote:
Originally Written by radd7
The edc16c39 I have written with success both with the kess that with the cock v54. Then or with one or other of us, you should be able.
I agree with what was said by Andrea1, as the laws the write
The delta is hard-wired k-line and then the write with mpps, perhaps on edc16c39 also faster and more sure of the other. The myth and the point 130hp are not wired the k-line and if you want to write to them you will need to bring a wire wheel from obd2 to the ecu
happened to me on some,you have to do it in bdm