failure of airbag

hello to all
I have my friend, the owner of a stylus that has a problem with the sensor, passenger airbag.
you have never solved these problems?
there is an emulator something to bypass the weight sensor?
thanks in advance

the systems are two or emulator or remove the ecu read the dump of the original and with a sw change without presence with a cushion, then write in the control unit and on.....

which emulator do you recommend??

clearly the dedicated one, and like the other see you....

if type through some diagnosis program disabiti the sensor ..?

the dump ? stored in the eprom of the ecu must be unsoldered read the file in bin content, and then changed I don't know if you can? to make the diagnosis I would have never heard....

save in the diagnosis that I know is not possible, I have made a lot of re-writing the file

on some units I through reading the dell drivers but you have to read the serial to see what kind of ecu'!!!

C'? a way to emulate the resistecia carpet, remember that ? can emulate for busy or empty ? preferable to emulate as busy, so that in the event of an accident activates the passenger airbag.

They also sell emulators, as you know, at a price of 70-80 €. Of course, pi? economical to buy a couple of resistors, but also their work and skill.

If someone is in need, when you find the tutorial I get stuck here. Greetings

I confirm, the diagnosis is not you can? to exclude the sensor weight, only via file, which to me is not always ? managed, maybe a couple of times, or you can emulate the weight sensor with the emulator. the price for? ? pi? low, at least the ones that I use....