opinion before the map audi 1.9 105 hp

hi all I have started****dense in this new world, looking at something around, I started to sketch out the first map made for a friend, why? he was unhappy from the previous map made by a preparation perhaps understand less than me, of course I am a nobody, but seeing its you they understand many things that do not go among the other not even the egr closed and if I have understood you well done hot start with the program ..
However, we we the the map I have loaded already on the machine, why? I have been told that you should not run the risk why? we say that ? the map soft .
My friend ? been happy for? of course, I asked the difference and he told me that I have changed I should be better at the low instead of the other is better for high rpm and then if I read it correctly in the forum, these cars have the limiter 200 . I said that the map was more I noticed yesterday that in his old ecu ? been touched a turn out of drivers that do not know, I thought both the limiter, I do not know for accuracy .
I would like to with the time to learn not to pretend you know how to do everything and, immediately, I hope in some help and some suggestions if ? can all here, the last thing I have changed a l warm start for? c'? a problem that I did not understand very well how to raise the curve, even if I had faced this problem in another discussion I thank you in advance

file ori deleted

the file ori should be inserted in the database if there were no gi?, in the discussion it must be pasted the link with the number of posts

a I'm sorry, the file I inserted I, then there is now, I put the link http://www.professionalchiptuning.ne...21-a3-s3/page4
post no. 38

you can still increase both the nafta and the turbo, to the warm start, the first two curves alzale as the third one, at least, on the 950 points.

Quote:

---

Originally Written by ugoboss

you can still increase both the nafta and the turbo, to the warm start, the first two curves alzale as the third one, at least, on the 950 points.

---

thank you for your help, I had read somewhere that the turbine ? delicate so not to give more than 100 points and then for the hot start I wrote at the beginning that I have to raise the two curves at about 900 but I can't do it the cio? if I do I will raise the curve that is little first

now place the map previously made by the preparer of the province
I wanted to know what changes had been made to address 0F551C there are two curves changed, what are they ??

Quote:

---

Originally Written by tonybiond

thank you for your help, I had read somewhere that the turbine ? delicate so not to give more than 100 points and then for the hot start I wrote at the beginning that I have to raise the two curves at about 900 but I can't do it the cio? if I do I will raise the curve that is little first

now place the map previously made by the preparer of the province
I wanted to know what changes had been made to address 0F551C there are two curves changed, what are they ??

---

let the mod that you've read from the car and the parts to be 0 on the basis of what you have read in this forum and I am sure that you do it 100 times better seen that the mapped next to give 150 points here and knew not what to do,rip.hot made with carsoft and when it sets in motion a fog of smoke.

Quote:

---

Originally Written by msport (exil77grande)

let the mod that you've read from the car and the parts to be 0 on the basis of what you have read in this forum and I am sure that you do it 100 times better seen that the mapped next to give 150 points here and knew not what to do,rip.hot made with carsoft and when it sets in motion a fog of smoke.

---

it is, in fact, the warm starting, I have read somewhere that he has used the sw carsoft for? according to my friend, started better before than now .
However, as I said earlier in my small experience that the map is made terrible as said msport rightly put 150 points in the case and that's it , now I have touched a bit more on the map, in fact I told my friend that there are other improvements after the place hoping to get your help, thank you

parts from scratch, I msport!!!

I also agree to start from scratch but with the map posted at the beginning there are no right or I have to redo everything from scratch

hi I have tried this new step by changing the hot starter, but I don't why? I can't seem to raise only the two curves at 900 without touching the curve before I do not understand what mistake on audi a 3 2.0 140 cv l I did but it was much more simple .
Then I gave up a few more of diesel and changed a little the torque limiter, what do you think ???