Printable View
hi all I have a problem with a suzuki jimmy 15 ddis with the engine control unit is damaged,I replaced the ecu with a renault kangoo always delphi ddcr but with different number I traded the eprom data immo,now goes into the diagnosis, but the car does not start and an error line code is not received,I have read the key and the box code ,can be the engine control unit is not compatible even if it goes in the diagnosis?thanks for any help.
may, have you tried to do a partial let him return to the code, but I think that it is them with the problem if you change the number of the ecu "is the problem"
I also tried to do a partial, but without result,according to your opinion it could run an emulator even if no unit is different?Quote:
Originally Written by legendaryslave
hoping that the problem is only on the code with the ecu with different numbers there are always problems of operation I would try to find an ecu with the same number, if you have at hand an emulator a try is not bad
meanwhile, thanks for the answers,the next week I try with an emulator and a lighthouse to know how and went to helloQuote:
Originally Written by legendaryslave
I also on a clio I solved with e xxx emulatorQuote:
Originally Written by alexracing
but here we do not v? the emulator there you go directly to the files !
I think that the emulator is necessary to make it total.
hello cicciocar you can do well even the file,but the problem is that we want to force the ecu with cod, equal to the original ,by comparing the unit with those of the clio change hrdware ,while putting l emulator does not work, try already made,look like the ecu is the same then I'll know.
Finally problem solved mounted control unit with equal numbers of exchanged data immo car ok